All Questions
44 questions
0
votes
0
answers
31
views
No hotkeys are assigned to the sculpt brush
Blender 4.3
In Sculpt Mode and Paint Mode, I assign hotkeys to brushes via the right-click menu. But when pressing these hotkeys, an error is displayed: ...
- 1
0
votes
0
answers
27
views
Is it possible to group sculpting brushes to adjust settings for selected brushes only?
This is my goal:
I want to group certain brushes to share a brush size setting. I imagine it like in Nomad Sculpt, for those who are familiar. Brushes that are used for broad strokes like draw or clay ...
- 1
0
votes
0
answers
24
views
Orb brush sculpts a lot of dots instead of a smooth line
I have tried every single setting for this orb cracks smooth edge brush and no matter what I do, it sculpts these weird dots like somehow I am pressing harder (which I'm not).
I tried changing the ...
0
votes
0
answers
22
views
Dyntopo not adding new geometry while using custom brushes from blenderkit
I tried using custom brushes, but the Dyntopo feature didn't work. I set it to constant detail at a value of 100, yet the brush behaved as if Dyntopo wasn't enabled. Does anyone have a solution?
- 51
0
votes
0
answers
23
views
Help with Mask brush Settings 4.2
I cannot figure out why my mask brush is jittery. To my knowledge, I've checked/unchecked all options that might be causing this problem, to no avail. How do I reset the brush to a smooth stroke, with ...
0
votes
0
answers
11
views
Blender sculpting Area vs View brush option
I'm trying to sculpt using an alpha but whenever a stroke is applied on a curved surface it stretches. I feel like the area and view option is not working properly.
1
vote
1
answer
336
views
How do I paint and sculpt with a ''Connected only'' brush? Like edit mode has
So instead of weight painting in a 3d sphere, which also catched onto close geometry, painting in a connected only manner, that only edit mode has as far as I know.
If this logic exists for edit mode, ...
- 35
0
votes
0
answers
24
views
How to set the brush falloff for all brushes in a single step?
Problem
I have imported 100 brushes to work with, each has a different individual setup.
Question
Is there a way to set the Falloff to "Smoother" on each of them in a single step?
Or do I ...
- 249
0
votes
0
answers
56
views
Imported sculpt brushes bulging and / or distorting mesh
As shown in the picture the imported / appended sculpt brush bulges the mesh outwards or erratically distorts it, sometimes both! As shown in the picture the brush is just supposed to stamp a bolt on ...
- 855
0
votes
1
answer
48
views
Sculpt Mode - Transform Brush - How to Uniform Scale (All Axes)
Is it possible to perform a uniform scale operation within the Transform brush? I've only been able to scale for individual axes, and had to use Scale brush for uniform scale.
Other 3D programs ...
2
votes
2
answers
189
views
Alpha Texture Brush isn't working?
I have Blender 4.1 and I'm trying to draw on scales with a brush from Blenderkit and there's no texture visible when I brush on the object it just creates this weird bump. I tried the brush out with ...
- 43
0
votes
0
answers
25
views
Why circle signifying brush in sculp mode isn’t round?
I can’t do round circle-shape touch in sculpt mode, my stretch brush draws stripes.
- 31
0
votes
0
answers
10
views
Custom brushed not imported as a single image
I'm importing a custom Alpha brush, although I have selected it as a single image, the brush looks like this:
I am trying to make dents into the mesh which is using a multiresolution modifier.
- 4,105
0
votes
2
answers
527
views
What's wrong with my front face only option?
I'm new to Blender, and I'm following a tutorial.
But when I'm sculpting, I have a problem with the rendering compared to the video.
In the tutorial, we use the "Clay strips" brush with an ...
- 1
0
votes
1
answer
38
views
sculpting Clay strip brush mirror issue
I have such strange problem when draw with clay strip brush a "circle shapes" (on the left) with mirror enabled. Not sure know if it was like this before, I just noticed this. How can I fix ...
- 19
1
vote
1
answer
56
views
while sculpting in blender, my inflate brush shows pink lines but doesn't inflate the geometry
I'm Vishakh. I'm new to sculpting in Blender. While sculpting in blender, my inflate brush shows pink lines but doesn't inflate the geometry. I'm not sure what settings need to modified so I reset to ...
2
votes
1
answer
217
views
How to avoid Jagged edges using custom brush in sculpt mode
I have made a custom brush. I have divided my mesh and has almost 1 million vertices. When I'm in sculpt mode, the custom brush pattern looks more smooth, when I exit sculpt mode the edges become ...
- 4,105
0
votes
1
answer
314
views
Textured sculpt brushes result in a bulging mesh
I have some textured sculpting brushes that recently have started to bulge the mesh in a cylindrical-like pattern whenever I use them. I don't know if Blender has changed how it looks at sculpt ...
- 3
0
votes
1
answer
55
views
sculpting is pretty much smooth
hey all I Don t Know what this exactly called, since I m New at scultping watched some tutorial but i really could n't find a solution as far as I know , so I M doing a face sculpting and I am trying ...
- 393
0
votes
1
answer
90
views
Sculpting brush behaves weirdly
I am still a beginner and I am trying to sculpt a character. However, I faced a problem with the brushes.
Suddenly, the brushes do not fill up the creased places and will not smooth out the surface. I ...
- 1
2
votes
1
answer
26
views
Problem with drop off when sculpting rock face
I'm trying to sculpt rock faces in blender. My normal work flow was to append photos sscanned rock textures to my draw brush in sculpt mode and then go from there. Since downloading the newest blender ...
- 21
0
votes
1
answer
127
views
clay strip adds only on one place
I m using blender and I m having a issue with clay strip brush as it only add to one placeeven if im moving the brush while holding the left mouse buttom.
the last thing I did was to enable Front ...
- 1
0
votes
1
answer
138
views
Sculpting Brushes Not Working as Intended
I'm trying to learn Blender in order to sculpt characters, but the brushes are not working as intended. I've tried following sculpting tutorials, but they're useless because all of the brushes are ...
1
vote
1
answer
49
views
Sculpting on thick areas effects the both sides of the shape
While sculpting on thick areas like ears the brush is effecting the both sides of the thick shape. I have seen some people was using a setting before using brushes on thick areas like this and i ...
- 11
0
votes
1
answer
216
views
Mesh Boundary Option Sculpting
I’ve never had luck getting the mesh boundary option to work as seen in these GIFs. Turning it on/off under advanced brush settings has no discernible effect, even when increasing propogation steps. I’...
- 31
1
vote
1
answer
47
views
All of my sculpting tools stopped working. They are just pushing my mesh down with a lot of intensity even though the strength is all the way down
I'm very new to blender and I decided to try my hand at sculpting. When I was sculpting a piece of clothing I decided to try and experiment with the clothing filter and since then none of my sculpting ...
- 13
0
votes
0
answers
59
views
How do I model a cave with realistic textures that show dirt and imperfections in the floor and walls?
I modeled a cave by starting with a cube, subdividing it, increasing the size and flattening the bottom. It looks like this now:
Using dyntopo I made the walls and floors all scratched and scuffed up....
- 499
1
vote
1
answer
54
views
all brushes draw differently on different sides
when I use any brush in sculpting mode, I have a problem with how brush work. All brushes draw differently on different sides.
That how it looks after I draw. It's like I used CTRL with one side, but ...
- 11
0
votes
1
answer
255
views
In sculpt mode, stroke:[curve] is not on top of mesh surface
its not even editing anything its just going through the mesh entirely. into the 3d abyss.
i want to do what this guy is doing here in this video:
https://www.youtube.com/watch?v=uideuXvJNX4
0
votes
0
answers
128
views
How can I use a custom skin pore brush to sculpt paint much higher detail?
I am a beginner at this and have been experimenting with creating my own custom skin pore brush in Krita. I've looked up dozens of tutorials on this and I've seen people use very low image sizes for a ...
0
votes
0
answers
348
views
Is there a way to sculpt without affecting edge length?
Essentially I want to be able to 'grab' without stretching as the Grab brush does.
For example, when I use the grab brush to move the mesh, it lengthens the edges. I want to keep them the same, just ...
- 1
0
votes
0
answers
31
views
Smooth Brush is making my model less smooth while sculpting
I am sculpting a human head at the moment and haven't had any issues so far with smoothing out certain parts of the model until very recently.
I already checked on the falloff of the brush and the ...
0
votes
0
answers
49
views
When you alternate a sculpting brush with modifier keys, is the alternation the exact same as the actual brush, or the inversion of the current brush?
Since some brushes can be executed while using other brushes, via modifier keys, eg.:
Fill brush, as I understand, is also accessible in ...
- 330
3
votes
1
answer
55
views
What technique do I use to sculpt a viper snake heat sensing holes?
Hello and sorry in advance if the question is too generic. I'm very new to blender, and struggle to finish one of my very first project. I'm trying to sculpt a blue viper snake head (to be precise the ...
0
votes
0
answers
438
views
My sculpting brush is pulling not adding
im fiddling around with sculpting and wanted to make a monster but when i try to add mesh with any brush it just pulls not adds
i dont want it to do this any help would be greatly appreciated
1
vote
1
answer
274
views
Automating a Cloth Brush Stroke with Python
Given a list of coordinates specifying the path of a brush stroke, I would like to have a python script that automatically applies the Cloth brush stroke like in the image bellow.
After modifying the ...
- 21
0
votes
0
answers
75
views
Blender Sculpt Brush changing when moving across mesh
When sculpting on a poly modeled mesh, with the multi-res modifier applied, the brush sometimes moves in a very stretched manner. All transformations are applied on the mesh also. It seems to happen ...
- 63
0
votes
1
answer
188
views
How to use detailed brushes in sculpt mode without having to use multiresolution on the entire object?
In the sculpt -> retopology workflow, it is very convenient to use textures with height information to add details "creatively", meaning you can drag them around and place them where it ...
- 1,170
1
vote
1
answer
702
views
The suitable brush for toes in sculpt mode?
I'm trying to make a character in blender and stuck with feet in sculpting mode. I can't find suitable brush to create toes. I've tried to "grab" it, but it breaks my topology, tried to &...
- 1,110
0
votes
0
answers
121
views
Normal map is looking weird and showing bumps that are not sculpted in sculpt mode
I don't know if anyone can notice at the middle of the normal map, there are strange pumps that I had not sculpted, but clearly showing here, even when I apply my normal map to the low poly mesh, it ...
- 1
6
votes
1
answer
5k
views
How do I keep the brush radius consistent while moving the camera
I noticed that when you use the brush tool to paint, sculpt or anything else inside Blender, the brush radius not only depends on the value you give it, but the distance between the camera view and ...
- 1,051
0
votes
1
answer
358
views
Precisely moving, rotating and scaling the mesh in the Sculpt mode do not work properly. Is this a Bug?
Here is the default cube with some loop cuts:
Now, in the Sculpt mode, let's mask the upper half of the cube, and then use the scale brush to increase the scale of the lower half in the X and Z ...
- 333
0
votes
0
answers
334
views
Clay strips sculpting brush cutting inward in certain areas and cutting outward in others
I am making an axe and am using the clay strips brush to make marks in the axe but when I draw over the part of the axe that is carved out the clay strip digs into the mesh instead of adding to it. I ...
- 315
0
votes
0
answers
374
views
Why can't I get my alpha brush to paint textures using images?
Alpha brush not showing texture, tried with different files and images, all make the same unwanted effect.
The example below is what a simple click and drag does, this is with the strength at 1.0 but ...
- 1