Questions tagged [cloth-simulation]

Questions pertaining to Blender's built-in cloth simulator. Blender's cloth simulator is accessed in the Physics panel.

Filter by
Sorted by
Tagged with
0
votes
0answers
4 views

Rendering a net shaped mesh in a cloth simulation

Im trying to drape a net - like mesh ( a plane with a wireframe modifier ) onto my skeleton model, kind of like a poncho, in the hope that i can use the character in an animation. However I can't even ...
0
votes
0answers
12 views

Cloth behaves strangely when trying to make a coat

I'm trying to make a coat and use the cloth modifier. I enabled colision but the mech of the coat just colapses. Does anyone know what is wrong?
0
votes
0answers
14 views

Cloth “exploding” when texture change

So I'm trying to do a simple simulation where a have an object with a cloth flying over it and during that the object change texture. the problem i'm having is when the texture changes the cloth ...
0
votes
0answers
11 views

Can I Smoke after cloth simulation?

I have a plane that have the properties of cloth, when it collides with an object I want that after certain time it explodes like smoke. How can I do that? I'm very new to this area
0
votes
1answer
31 views

Cloth and smoke simulation not working

So I was creating a smoke sim (in 2.82) and had a cloth fall onto the smoke to act as an obstacle, so that it would collide with the smoke, however it did not. I have set the cloth to be an effector ...
0
votes
0answers
14 views

Cloth simulation simulate 2 unlinked meshes together as one

Gentlemen, I have a problem with the cloth simulation. The object I am simulating consists of 2 or more parts that are not interconnected. As a result, the simulation treats them as two separate ...
0
votes
0answers
18 views

Rubber gloves physics animation?

I was wondering if anyone might be able to assist me in figuring out how to animate a character putting on some rubber gloves. I essentially have a character and a pair of gloves. I've gotten the ...
0
votes
0answers
32 views

Is there a easy way to animate something like jonnoorlander or extraweg in blender? [closed]

I really like the work of jonnoorlander and extraweg. https://www.instagram.com/p/B8nr_lUnXAI/?igshid=87xeu0cr55td https://www.instagram.com/p/Bdz-mPuByuz/?igshid=1amwvtjnt976h I've tried a lot with ...
4
votes
2answers
2k views

Why does my cloth simulation fall even though it shouldn't?

I followed the instructions in this video exactly, but still I get this result. Here are my ncolth settings The collision settings are set as default. Here is the result which is unsatisfactory.
0
votes
0answers
12 views

Importing .FBX .DAE files from Blender to Marvelous Designer Error [closed]

Arrangement Points were not fitted to the avatar. The avatar must be in a T-pose or A-pose. yes, i know this is mainly a MD question, but are there steps i must take in blender in order to get it to ...
1
vote
0answers
38 views

curtains with tassels

I modeled curtains for an arcitectural scene now I want to add an edge of small tassels to the curtains. I tried selecting the edge of the curtain, converting it to a curve and arraying the tassel and ...
1
vote
0answers
33 views

How to pin cloth object to another object

I'm trying to pin a cloth object to another object. I tried to fix it through the Vertex group. However, because the two objects are dissimilar objects, cannot try to pin them together into the same ...
0
votes
1answer
30 views

Animate Collision On and Off

I have an object that a cloth is colliding with, and I want the collision to be disabled in the middle of the animation. However, I cannot just turn off object Collisions on the cloth, because there ...
1
vote
1answer
115 views

How to twist a cloth?

I am starting to get pretty stressed and sad. This is for a mobile game I have accepted a project for and if can't solve this I might have to drop this project which will cost me a bit. So if you ...
1
vote
0answers
31 views

Cloth simulation bouces around when falling - does not settle

Thanks in advance! Version 2.82.6 I am trying to drop a bedspread on top of a bed. When I run the cloth sim, the bedspreads falls just a little then bounces/dances around and never reaches the ...
0
votes
1answer
775 views

How do I install the new cloth brush

I recently saw that the cloth brush is now open for people to use, but I don't know how to get it?
0
votes
1answer
20 views

Camera background image not visible through transparent cloth

I have a simple cloth simulation that I want to export as a video. A background image is setup from within the camera. The problem is: The flag is suppossed to be slighty translusent but the ...
0
votes
0answers
11 views

Can you cache simulations into action editor?

Is it possible to have the simulation as a unit of "action"? Say my character is wearing a dress and I do a kick animation. The dress would cloth simulated into a cache combined with the bone and ...
3
votes
1answer
79 views

Unpinning Cloth Deforms Object

I have a plane for which I've enabled the cloth modifier. I have pinned the four corners of the plane to empty objects. I've animated the empty objects to move the plane down and collide with a sphere....
0
votes
0answers
19 views

Connect cloth object with rigid body

Im trying to simulate a fabric which bonds 2 rigid bodies. I want the cloth to keep the rigid bodies "connected" but i need the cloth to be affected (namely to be stretched) by the rigid bodies as ...
1
vote
3answers
93 views

Rotating skirt effect, possible with cloth simulation?

I wonder if the rotating skirt effect is possible with cloth simulation. I tried that and from the 100's frame I rotated the body, but the cloth did not rotate even though I pinned the cloth to the ...
0
votes
0answers
24 views

What is wrong with this cloth?

I'm trying to put cloth on a goblin model. Why is this cloth not working? If I open another blend file and add the cloth exactly the same as this one, the cloth simulates, but this one refuses to. ...
0
votes
0answers
37 views

Cloth simulation. Should it be a separate object, or part of the character and control with bones?

I was thinking of making the model as separate parts and add the cloth simulation to each part that I wanted, but maybe doing everything as one model and then controlling the cloth with bones is a ...
1
vote
1answer
30 views

How do you scale cloth simulations?

I can't figure out what exactly to do with this, when I run the simulation at a smaller scale, everything is fine. When I scale it by 10 it becomes strange, even though everything is aligned with ...
0
votes
0answers
23 views

Tricky Cloth Simulation with Cut

I try to create a cloth simulation where at some point the cloth is cut along the edges. I am in 2.83 where there is a Weld Modifier now which just applies the "Merge by Distance" operation on the ...
0
votes
0answers
18 views

Achieving a wavy curtain with cloth simulator [duplicate]

I am modeling a room, and I want to know if there is a way to use the cloth simulator with certain settings to create a wavy pattern on a curtain in the room. It is similar to this question: How to ...
1
vote
1answer
40 views

Why does this cloth go down past the top surface of the cube?

I was following a tutorial on YouTube, and the presenter said that he did not change the default options other than enabling self-collision and increasing the collision object's friction from 5 to 10. ...
0
votes
1answer
44 views

Cloth simulation acting wonky in render. Correct in viewport

I've baked a cloth simulation and parented it to another object. The animation looks right in the viewport but when I render it, it jumps to the right on the X axis and then gradually floats to the ...
0
votes
0answers
17 views

How to change cloth caches

Using a cloth simulation, is it possible to have the animation switch in which cloth cache is viewed at a certain time? I want to have one cloth cache and switch it to a different cache after the ...
1
vote
1answer
30 views

Cloth hanging over a cube but the cloth is floating

The tutorial on YouTube said something like these: Place a plane on a cube. Select some faces as a new vertex group. Add cloth to the plan and select the vertex group as the pin group. Add collision ...
0
votes
0answers
21 views

Rigid Body Follow Path

I have a project where I want to make the bottom of a Rope (with cloth sim that will be hiden after) sustain a Cube (rigid body). The top of the rope will be attached to an Empty Plain Axes that's ...
0
votes
0answers
21 views

How to make baggy clothes using Cloth Sewing, Cloth Modifier and Object Collision?

My question is two fold: 1) How to make baggy clothes in blender using Cloth Sewing, Cloth Modifier and Object Collision? In all my attempts the cloth : a) Fell down into the never ending abyss ...
0
votes
0answers
17 views

Cloth disappears when switching from object to edit back to object mode

I've created a cloth object from a plane, then added several force fields to have an effect on it. The cloth is also weight painted in several vertex groups. These are the only objects in the scene. ...
1
vote
0answers
55 views

Mesh deform problem (Sphere)

I have a cage and a mesh and the cage has inner edges for the cloth simulation can look more like a ball bouncing. When I add a mesh deform to the mesh and target the cage and run the animation this ...
0
votes
1answer
42 views

Need help with animating cape (Blender 2.79)

So I am trying to do an animation that involves a cape. I decided I would try to use the cloth simulation but I ran into an issue. My normal method for animating with a character involves the ...
0
votes
0answers
8 views

How to transfer the complete cloth simulation settings from one object to another (Blender 2.8x)?

How to transfer the complete cloth simulation settings from one object to another (Blender 2.8x) ?
2
votes
1answer
22 views

Can someone fix this problem with cloth physics?

I am trying to re-create this scene from a youtube tutorial. There are two cubes in the scene (the bed and mattress). The cloth is supposed to fall on the mattress but it falls through it on the ...
2
votes
1answer
44 views

Cloth simulation doesnt work

I am following a youtube tutorial, but the cloth simulation doesn't work as desire. May I know what the problem is? I have not idea what is going wrong
0
votes
0answers
47 views

Two meshes stitched together

I want to simulate two pieces of fabric to act like they are stitched together so when I move a cloth, the outher cloth come with the first in a specific point of the mesh Something like that (the ...
2
votes
1answer
251 views

Cloth Pinning checkbox missing in Blender 2.8

There is no option to pin a vertex group to hold the cloth at the position! 2.79 had this feature
1
vote
1answer
32 views

Cloth Simulation Getting Eaten By Mesh

So I'm making a model for animation, and I wanted it to have some clothes that are all flowy. I modeled the body and one piece of clothing so far, and it looks fine barring one glaring issue: https://...
0
votes
0answers
35 views

Render Problem With Tearing Cloth Effect

I made a animation for flag which is tearing apart. But i can't render it. I view clear render in 3D viewport but when i render it it looks like this which you can see on picture. You can also see my ...
0
votes
0answers
11 views

How can I simulate a rigid body placed on top of cloth? [duplicate]

I am trying to simulate an object placed on top of some rumpled cloth. I can simulate the cloth ok (cloth falls 'over' an object to cause it to crumple, then falls on a rigid body) but when I try to ...
1
vote
0answers
19 views

Editing the Cached Simulation

In the documentation there is a section Cloth Simulations --> Settings --> Cache --> Editing the Cached Simulation. I'm trying to edit the cached simulation but not finding the "Bake Editing" button ...
0
votes
0answers
15 views

My Cloth physics glitch my object

So, it may just be that my poor computer can't handle this amazing program, but every time I try to add cloth physics to my model's clothing, the clothes spaz out. This is the mesh: This is what it ...
0
votes
2answers
83 views

Modelling a modern dome tent

I am trying to model a dome tent with four sides for an outdoor night scene but I cannot figure out the modelling approach. I have seen this question and it helps to make the basic shape, but I want ...
0
votes
1answer
48 views

Cloth falls inside object rather than on top

As you can see in the picture, the blanket folds inside of the top mattress when it's supposed to fall on top. The blanket starts outside of the perimeter of the mattress but gets sucked in for some ...
0
votes
0answers
11 views

why the cloth doesn't fit the model using the cloth simulation?

even though if i created some kind of another model or a box, the cloth simulation work properly on it yet it doesn't work well on my model, and it shrinks inside of it, i have tried a lot and it didn'...
0
votes
0answers
17 views

Physics is not rendering, It only renders when I bake it

So basically I was making a flag simulation and it sticks to the initial frame and it doesn’t simulate anything for the whole render.(Unless I bake it). Is this meant to be or is something wrong, ...
0
votes
0answers
27 views

How would I simulate a rigid body that's connected to a cloth?

I want to simulate a hammock, and I want to make some metal loops to go in the fabric of the hammock. I don't want the loops to be simulated as a cloth like the fabric; I want the metal loops to have ...

1 2 3 4 5 9