How can I create a "Toggle Switch Sensor", so when I press W to move a cube continuously on the Y axis, and S to stop the movement? Can I do it from logic bricks?
$\begingroup$
$\endgroup$
Add a comment
|
2 Answers
$\begingroup$
$\endgroup$
0
You can do that Very simply using a Boolean property and pressing W to start it moving continuously and pressing W again to stop. See logic setup below
Or you can have W make it start and S make it stop by using the setup below
Working blend file with Boolean property
answered Oct 31, 2014 at 22:25
X-27 is done with the networkX-27 is done with the network
10.6k5 gold badges51 silver badges82 bronze badges
$\begingroup$
$\endgroup$
0
It is possible to do this using a Boolean property and changing it using the toggle option, but it is easier to simply assign an integer a value. A Property Sensor set to pulse mode (to continually check to see if the value is still equal) and that activates your motion.
Blend file with working logic setup
![enter image description here][3]
answered Oct 31, 2014 at 1:28
X-27 is done with the networkX-27 is done with the network
10.6k5 gold badges51 silver badges82 bronze badges