I followed the instructions in this video exactly, but still I get this result.
Here are my ncolth settings
![Nclot[![h settings][2]][2]](https://i.sstatic.net/HjFrA.png)
The collision settings are set as default.
Here is the result which is unsatisfactory.
$\begingroup$
$\endgroup$
2
-
$\begingroup$ How can i share the file? $\endgroup$– Hamza KhuswanCommented Feb 16, 2020 at 17:55
-
$\begingroup$ You can share it here Blend-Exchange, check if my answer helps first though $\endgroup$– XylvierCommented Feb 16, 2020 at 17:57
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
3
Increase Physics Properties > Collision > Softbody And Cloth > Friction value for bed (mattress) object.
-
$\begingroup$ While friction would slow or stop the cloth from falling, i wonder if it's not a case of empty pin group. $\endgroup$– XylvierCommented Feb 16, 2020 at 18:04
-
$\begingroup$ I tried simple cube with a plane on top of that, with just a decent move on side (over an edge) and it felt down with default setup quickly (even faster with dense topo). $\endgroup$– vkliduCommented Feb 16, 2020 at 18:12
-
$\begingroup$ I changed the friction to max and it worked. It stopped falling. Thanks $\endgroup$ Commented Feb 16, 2020 at 18:14