I have these 2, almost identical soda cans.
Why is the UV Editors, not even close to the same size? (see linked photos)
Is this normal, or have I done something wrong?
Im new to blender :D
Have a nice friday! : DD
- Jona
$\begingroup$
$\endgroup$
4
-
$\begingroup$ hello could you please share your object? blend-exchange.com $\endgroup$– moonbootsCommented Mar 3, 2023 at 21:22
-
$\begingroup$ Hi :D, what you mean, the hole blender file or? - Jona $\endgroup$– JonaCommented Mar 3, 2023 at 21:38
-
$\begingroup$ You can share the whole Blender file via blend-exchange.com following the instructions there. $\endgroup$– John EasonCommented Mar 3, 2023 at 22:23
-
$\begingroup$ I added the blender file now! Ty :D $\endgroup$– JonaCommented Mar 3, 2023 at 23:17
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
4
Your second object is unwrapping strangely because it is suffering from Non-Uniform Scale (It has been scaled in object mode without scale being applied). To fix, select the object in object mode, press Ctrl + A (apply) and select Scale:
Also - in the file you provided, the smaller can lacks a seam along the side, as well as around the bottom "cap".
answered Mar 3, 2023 at 23:32
-
$\begingroup$ Hi Christopher. I appreciate your help! :D Do you know why there is so much difference in the scale of these? (See link)imgur.com/a/OigGg5l $\endgroup$– JonaCommented Mar 4, 2023 at 0:01
-
$\begingroup$ Yes - it's because of the reason I mentioned in my answer, I believe. Apply the scale (and add the seams if necessary) and unwrap again, and they should be a pretty close match. $\endgroup$ Commented Mar 4, 2023 at 0:22
-
$\begingroup$ Oh - Now it works, thanks! The only thing im wondering about now, is that it rotated 90 degrees. Do you have an idea why? Photo: imgur.com/a/cpcdBIl - thanks again, Helped a lot <3! $\endgroup$– JonaCommented Mar 4, 2023 at 0:52
-
$\begingroup$ Not sure. Probably has to do with one mesh missing an end cap. If it's a problem, just select the whole UV and rotate by 90. $\endgroup$ Commented Mar 4, 2023 at 1:21