Can't find the node! Which node is available in which Blender version?

Question

It's not hard to lose track of all the Geometry Nodes in Blender, especially since names and function have changed over time.

...But honestly, it's getting pretty tedious.

Many tutorials talk about nodes that I can't find in my version, and the official Blender documentation doesn't help me here to get an overview of the nodes and their history.

Also an internet search does not give me any useful results on the subject.

Hence the question:

Which nodes can be found in which Blender version?

Note: This question (and answer) serves as a target for the recurring question regarding undiscoverable nodes, which is asked again and again in various forms, and is intended to show as simply and clearly as possible how nodes have changed over time.

Answer 1

Geometry Nodes Overview

_{(Status as of April 27, 2024)}

Here you can find a complete list of Geometry Nodes available in different Blender versions in tabular form.

Since here unfortunately a restriction of the number of characters is set to 30000, it was not possible for me to add the links to the respective documentation.

Therefore I have additionally published this list in HTML format, which contains further links directly to the respective documentation of the individual nodes:
Geometry Nodes Overview

Attribute Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Attribute Statistic	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Blur Attribute	-	-	-	-	-	Yes	Yes	Yes
Capture Attribute	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Domain Size	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Transfer Attribute	Yes	Yes	Yes	Yes	-	-	-	-
Remove Named Attribute	-	-	Yes	Yes	Yes	Yes	Yes	Yes
Store Named Attribute	-	-	Yes	Yes	Yes	Yes	Yes	Yes

Additional changes since version 3.4:

• The Transfer Attribute node has been removed and split into multiple more specific nodes:

  • The Sample Index node retrieves data from specific geometry elements by index.
  • The Sample Nearest node retrieves the indices from the closest geometry elements
  • The Sample Nearest Surface node interpolates a field input to the closest location on a mesh surface.

  On that topic, check out this post explaining how to use the new nodes:
  Where is Transfer attribute in 3.4?

Additional changes since version 3.5:

• The Store Named Attribute node can now store 2d vector attributes

Addendum: Replaced Attribute Nodes

Some nodes were completely replaced by other nodes after version 2.93 due to the introduction of Fields:

	2.92	2.93 LTS	3.x
Attribute Clamp	-	Yes	Clamp
Attribute Color Ramp	Yes	Yes	Color Ramp
Attribute Combine XYZ	-	Yes	Combine XYZ
Attribute Compare	Yes	Yes	Compare
Attribute Convert	-	Yes	Transfer Attribute (3.1+) Interpolate Domain (3.3+)
Attribute Fill	Yes	Yes	Capture Attribute (3.1+) Store Named Attribute (3.2+)
Attribute Map Range	-	Yes	Map Range
Attribute Math	Yes	Yes	Math
Attribute Mix	Yes	Yes	Mix
Attribute Proximity	-	Yes	Geometry Proximity
Attribute Randomize	Yes	Yes	Random Value
Attribute Remove	-	Yes	Remove Named Attribute (3.2+)
Attribute Sample Texture	-	Yes	Image Texture
Attribute Separate XYZ	-	Yes	Separate XYZ
Attribute Vector Math	Yes	Yes	Vector Math

Color Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0	4.1+
Blackbody	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Color Ramp	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Combine RGB	Yes	Yes	Yes	Yes	Yes ⇲	-	-	-	-	-	-
Combine Color	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes
MixRGB *	-	-	Yes	Yes	Yes	Yes ⇲	-	-	-	-	-
Mix Color *	-	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
RGB Curves	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Separate RGB	Yes	Yes	Yes	Yes	Yes ⇲	-	-	-	-	-	-
Separate Color	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes

_{* The nodes MixRGB and Mix Color are referred to as "Mix" in the title of the node.}

Curve Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Curve Length	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve to Mesh	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve to Points	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Deform Curves on Surface	-	-	-	Yes	Yes	Yes	Yes	Yes
Fill Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Fillet Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Interpolate Curves	-	-	-	-	-	Yes	Yes	Yes
Resample Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Reverse Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Sample Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Subdivide Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Trim Curve	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Handle Positions	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Tangent	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Tilt	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Endpoint Selection	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Handle Type Selection	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Is Spline Cyclic	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Spline Length	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Parameter	Yes ⇲	-	-	-	-	-	-	-
Spline Parameter	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Spline Resolution	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Curve Normal	-	-	-	-	Yes	Yes	Yes	Yes
Set Curve Radius	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Curve Tilt	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Handle Positions	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Handle Type	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Spline Cyclic	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Spline Resolution	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Spline Type	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Additional changes since version 3.5:

• The Trim Curves node now has a selection input

Curve Primitive Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Arc	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Bézier Segment	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Circle	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Line	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Curve Spiral	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Quadratic Bézier	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Quadrilateral	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Star	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Curve Topology Nodes

	3.4	3.5	3.6	4.0+
Offset Point in Curve	Yes	Yes	Yes	Yes
Curve of Point	Yes	Yes	Yes	Yes
Points of Curve	Yes	Yes	Yes	Yes

Geometry Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6	4.0	4.1+
Bake	-	-	-	-	-	-	-	-	-	-	Yes
Bounding Box	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Convex Hull	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Delete Geometry	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Duplicate Elements	-	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Geometry Proximity	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Geometry to Instance	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Join Geometry	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Merge by Distance	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Raycast	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Sample Index	-	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Sample Nearest	-	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Separate Components	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Separate Geometry	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Split to Instances	-	-	-	-	-	-	-	-	-	-	Yes
Transform	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set ID	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Position	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Index of Nearest	-	-	-	-	-	-	-	-	Yes	Yes	Yes

Input Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0	4.1+
Boolean	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Active Camera	-	-	-	-	-	-	-	-	-	-	Yes
Collection Info	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Color	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Image	-	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Image Info	-	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Integer	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Is Viewport	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Material	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Object Info	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Self Object	-	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Scene Time	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
String	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Value	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Vector	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Index	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Named Attribute	-	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Normal	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Position	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Radius	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
ID	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Random Float *	Yes	Yes *	-	-	-	-	-	-	-	-	-

_{* The node Random Float has been renamed to Random Value and has been moved to the category "Utilities" since version 3.0.}

Additional changes since version 3.5:

• The Named Attribute input node now has an "Exists" output to tell whether the attribute exists

Instances Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Instance on Points	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Instances to Points	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Rotate Instances	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Scale Instances	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Translate Instances	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Realize Instances	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Instance Rotation	-	-	-	Yes	Yes	Yes	Yes	Yes
Instance Scale	-	-	-	Yes	Yes	Yes	Yes	Yes

Material Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Replace Material	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Material Index	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Material Selection	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Material	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Material Index	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Mesh Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Dual Mesh	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Edge Paths to Curves	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Edge Paths to Selection	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Extrude Mesh	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Flip Faces	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Boolean	Yes	Yes ⇲	-	-	-	-	-	-	-	-
Mesh Boolean	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Mesh to Curve	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Mesh to Points	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Mesh to Volume	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Sample Nearest Surface	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Sample UV Surface	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Scale Elements	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Edges Split	Yes	Yes ⇲	-	-	-	-	-	-	-	-
Split Edges	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Subdivide	-	Yes ⇲	-	-	-	-	-	-	-	-
Subdivide Mesh	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Subdivision Surface	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Triangulate	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Edge Angle	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Edge Neighbors	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Edge Vertices	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Edges to Face Groups	-	-	-	-	-	-	-	Yes	Yes	Yes
Face Area	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Face Neighbors	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Face Set Boundaries	-	-	-	-	-	-	Yes ⇲	-	-	-
Face Group Boundaries	-	-	-	-	-	-	-	Yes	Yes	Yes
Face is Planar	-	-	-	-	Yes	Yes ⇲	-	-	-	-
Is Face Planar	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Is Face Smooth	-	-	-	-	-	-	-	-	-	Yes
Is Edge Smooth	-	-	-	-	-	-	-	-	-	Yes
Is Shade Smooth	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Mesh Island	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Shortest Edge Paths	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Vertex Neighbors	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Set Shade Smooth	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Mesh Primitive Nodes

	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Cone	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Cube	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Cylinder	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Grid	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Icosphere	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Circle	Yes ⇲	-	-	-	-	-	-	-	-
Mesh Circle	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Line	Yes ⇲	-	-	-	-	-	-	-	-
Mesh Line	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
UV Sphere	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Mesh Topology Nodes

	3.4	3.5	3.6 LTS	4.0+
Corners of Face	Yes	Yes	Yes	Yes
Corners of Vertex	Yes	Yes	Yes	Yes
Edges of Corner	Yes	Yes	Yes	Yes
Edges of Vertex	Yes	Yes	Yes	Yes
Face of Corner	Yes	Yes	Yes	Yes
Offset Corner in Face	Yes	Yes	Yes	Yes
Vertex of Corner	Yes	Yes	Yes	Yes

Output Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Viewer	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Point Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6	4.0
Distribute Points in Volume	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Point Distribute	Yes	Yes ⇲	-	-	-	-	-	-	-	-
Distribute Points on Faces	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Points	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Points to Vertices	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Points to Volume	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Points to Curves	-	-	-	-	-	-	-	-	-	Yes
Set Point Radius	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Addendum: Replaced Point Nodes

Some nodes were completely replaced by other nodes after version 2.93:

	2.92	2.93 LTS	3.x
Align Rotation to Vector	Yes	Yes	Align Euler to Vector
Point Distribute	Yes	Yes	Distribute Points on Faces
Point Instance	Yes	Yes	Instance on Points
Point Rotate	Yes	Yes	Rotate Euler
Point Scale	Yes	Yes	Vector Math (Scale)
Point Separate	Yes	Yes	Separate Geometry
Point Translate	Yes	Yes	Set Position

Text Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Join Strings	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Replace String	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Slice String	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Special Characters	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
String Length	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
String to Curves	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Value to String	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Texture Nodes

	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0	4.1+
Brick Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Checker Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Gradient Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Image Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Magic Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Musgrave Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	-
Noise Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Voronoi Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Wave Texture	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
White Noise	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Additional changes since version 3.5:

• The Image Texture node has a new mirror extension type

Utilities Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0	4.1+
Accumulate Field	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Align Euler to Vector	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Boolean Math	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Clamp	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Float Compare	Yes	Yes ⇲	-	-	-	-	-	-	-	-	-
Compare Floats	-	-	Yes ⇲	-	-	-	-	-	-	-	-
Compare	-	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Field at Index	-	-	-	Yes	Yes	Yes	Yes ⇲	-	-	-	-
Evaluate at Index	-	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Float Curve	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Float To Integer	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Interpolate Domain	-	-	-	-	-	Yes	Yes ⇲	-	-	-	-
Evaluate on Domain	-	-	-	-	-	-	-	Yes	Yes	Yes	Yes
Map Range	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Math	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Mix	-	-	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Random Value	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Rotate Euler	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Rotate Vector	-	-	-	-	-	-	-	-	-	Yes	Yes
Rotate Rotation	-	-	-	-	-	-	-	-	-	-	Yes
Axis Angle to Rotation	-	-	-	-	-	-	-	-	-	Yes	Yes
Euler to Rotation	-	-	-	-	-	-	-	-	-	Yes	Yes
Rotation to Euler	-	-	-	-	-	-	-	-	-	Yes	Yes
Rotation to Quaternion	-	-	-	-	-	-	-	-	-	Yes	Yes
Quaternion to Rotation	-	-	-	-	-	-	-	-	-	Yes	Yes
Invert Rotation	-	-	-	-	-	-	-	-	-	Yes	Yes
Rotation to Axis Angle	-	-	-	-	-	-	-	-	-	Yes	Yes
Index Switch	-	-	-	-	-	-	-	-	-	-	Yes
Menu Switch	-	-	-	-	-	-	-	-	-	-	Yes
Switch	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Vector Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Combine XYZ	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Separate XYZ	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Vector Curves	-	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Vector Math	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Vector Rotate	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Volume Nodes

	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Volume Cube	-	-	-	-	Yes	Yes	Yes	Yes	Yes
Volume to Mesh	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

UV Nodes

	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Pack UV Islands	Yes	Yes	Yes	Yes	Yes
UV Unwrap	Yes	Yes	Yes	Yes	Yes

Group Nodes

	2.92	2.93 LTS	3.0	3.1	3.2	3.3 LTS	3.4	3.5	3.6 LTS	4.0+
Group Input	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Group Output	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes

Hair Nodes

		3.5+
Deformation:
	Blend Hair Curves	Yes
	Displace Hair Curves	Yes
	Frizz Hair Curves	Yes
	Hair Curves Noise	Yes
	Roll Hair Curves	Yes
	Rotate Hair Curves	Yes
	Shrinkwrap Hair Curves	Yes
	Smooth Hair Curves	Yes
	Straighten Hair Curves	Yes
	Trim Hair Curves	Yes
Generation:
	Duplicate Hair Curves	Yes
	Generate Hair Curves	Yes
	Interpolate Hair Curves	Yes
Guides:
	Braid Hair Curves	Yes
	Clump Hair Curves	Yes
	Create Guide Index Map	Yes
	Curl Hair Curves	Yes
Read:
	Curve Info	Yes
	Curve Root	Yes
	Curve Segment	Yes
	Curve Tip	Yes
	Hair Attachment Info	Yes
Utility:
	Attach Hair Curves to Surface	Yes
	Redistribute Curve Points	Yes
	Restore Curve Segment Length	Yes
Write:
	Set Hair Curve Profile	Yes

Node-Based Tools

With version 4.0, geometry nodes can now also be created as tools, which are then available in the main menu.

	4.0+
3D Cursor	Yes
Face Set	Yes
Selection	Yes
Set Face Set	Yes
Set Selection	Yes

---

Addendum: Math Nodes

Most mathematical operations hide behind the nodes Math and Vector Math, which can be found in the category Utilities and Vector respectively.

So if you see a node that does not appear with its name in the above list, it is almost certainly one of these two nodes whose property has been set to a specific mathematical operation, and thus also shows the corresponding name in the title.

Vector Math Nodes

The operations available in Vector Math are:

	2.92	2.93 LTS	3.0+
Add	Yes	Yes	Yes
Subtract	Yes	Yes	Yes
Multiply	Yes	Yes	Yes
Divide	Yes	Yes	Yes
Multiply Add	-	-	Yes
Cross Product	Yes	Yes	Yes
Project	Yes	Yes	Yes
Reflect	Yes	Yes	Yes
Refract	-	Yes	Yes
Faceforward	-	Yes	Yes
Dot Product	Yes	Yes	Yes
Distance	Yes	Yes	Yes
Length	Yes	Yes	Yes
Scale	Yes	Yes	Yes
Normalize	Yes	Yes	Yes
Wrap	Yes	Yes	Yes
Snap	Yes	Yes	Yes
Floor	Yes	Yes	Yes
Ceil	Yes	Yes	Yes
Modulo	Yes	Yes	Yes
Fraction	Yes	Yes	Yes
Absolute	Yes	Yes	Yes
Minimum	Yes	Yes	Yes
Maximum	Yes	Yes	Yes
Sine	Yes	Yes	Yes
Cosine	Yes	Yes	Yes
Tangent	Yes	Yes	Yes

Math Nodes

The operations available in Math are as follows (these are equally available in all versions):

	All Versions
Functions:
	Add
	Subtract
	Multiply
	Divide
	Multiply Add
	Power
	Logarithm
	Square Root
	Inverse Square Root
	Absolute
	Exponent
Comparison:
	Maximum
	Less Than
	Greater Than
	Sign
	Compare
	Smooth Minimum
	Smooth Maximum
Rounding:
	Round
	Floor
	Ceil
	Truncate
	Fraction
	Modulo *
	Wrap
	Snap
	Ping-Pong
Trigonometric:
	Sine
	Cosine
	Tangent
	Arcsine
	Arccosine
	Arctangent
	Arctan2
	Hyperbolic Sine
	Hyperbolic Cosine
	Hyperbolic Tangent
Conversion:
	To Radians
	To Degrees
	Clamp

* In Blender version 4.0, the Modulo node has been split into two options:

• Truncated Modulo : Outputs the remainder once the first value is divided by the second value.
• Floored Modulo: Returns the positive remainder of a division operation.

---

...and if you still see a node somewhere in a screenshot/tutorial that is not listed here, then it is most likely an individually assigned title.