Skip to main content
Bumped by Community user
Bumped by Community user
replaced http://blend-exchange.giantcowfilms.com with https://blend-exchange.giantcowfilms.com
Source Link

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

http://blend-exchange.giantcowfilms.com/embedImage.png?bid=2064

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

http://blend-exchange.giantcowfilms.com/embedImage.png?bid=2064

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
added 8 characters in body
Source Link
aliasguru
  • 11.3k
  • 2
  • 37
  • 74

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

Blend file-issue with structure in the middlehttp://blend-exchange.giantcowfilms.com/embedImage.png?bid=2064

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

Blend file-issue with structure in the middle

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

http://blend-exchange.giantcowfilms.com/embedImage.png?bid=2064

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

deleted 8 characters in body
Source Link

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

http://blend-exchange.giantcowfilms.com/embedImage.png?bid=2063Blend file-issue with structure in the middle

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

http://blend-exchange.giantcowfilms.com/embedImage.png?bid=2063

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

I've been doing something that may seem weird.

My workflow has been separate objects using loop cut into separate faces. I then use UV to apply a texture to all of these faces. It has been working fine for 2 different maps I've done, but now it's glitching in a weird way. In the photo you can see the outer wall, and a glitching inner wall. The inner wall is not any different than the outer one and was copied from it pre-uv and loop cuts. The outer walls are overlapping in the same way as the inner ones, and everything I do with the inner walls, they keep breaking the textures and applying both a Unwrap and (unwrap) reset texture simultaneously.

This is happening whether the inner walls are overlapping each other or not. So it is nothing to do with the face that they are intersecting as far as I can tell.

Anyone care to explain to me what is going on? Only certain walls are refusing to apply the uv map correctly and there is very little difference between the ones that are and the ones that aren't.

Blend file-issue with structure in the middle

I've added the file here. This isn't the one I took a picture of, but the house in the middle has a wall that is doing the same thing as the the hedges.

Something wrong with UV reset or UV Unwrap

moved the file to blend-exchange
Source Link
aliasguru
  • 11.3k
  • 2
  • 37
  • 74
Loading
added 259 characters in body
Source Link
Loading
Source Link
Loading