Questions tagged [texture-painting]

Questions about Blenders Texture Painting. Texture painting is a tool used to paint textures on to an object in real time. (both in the 3D view, and the UV Image Editor)

Filter by
Sorted by
Tagged with
0
votes
0answers
18 views

Texture Painting: How to not have jagged edges when drawing?

I'm doing texture painting. I get these horrible jagged lines when painting, I want straight lines, what am I doing wrong? How can I do it better, if I can? Here's some info to help you out: 1. I let ...
0
votes
0answers
21 views

An okay laptop configuration for Blender [on hold]

I am thinking to buy a laptop to learn Blender for Projection mapping in the real world; projecting 3d models onto real objects using a projector. Something like this but with much smaller objects, ...
1
vote
1answer
31 views

warning message when the images has not been saved

I'm doing texture painting and using a new texture. Sometime after painting i forget to save that image and when i quit there's no warning at all. Is there any setting in Blender to prevent this ?
0
votes
1answer
42 views

Texture Paint painting on back of selected object

I'm new to Blender, trying to use Texture Paint mode on a model I've made. I've got the texture and UV map set up right so far as I can tell, but when I try to paint on the object, the texture is ...
0
votes
0answers
18 views

I try to draw details but the brush fills the entire mesh

I have a strange effect disabling texture painting. I try to draw a texture on a high poly object (470.000 vertices) that should later be projected onto a low poly object. But the draw brush fills ...
0
votes
0answers
15 views

Texture Painting - Brush only paints on half of face, sometimes paints on faces not facing viewport

The problem can be seen in this photo. It's driving me insane. I've found a lot of people having similar issues, but nothing as solved not being able to paint on one half of the face:
0
votes
0answers
27 views

My mesh is grey and I'm not able to paint it

I'm new to Blender and had probably pressed something wrong when painting the mesh but it has some grey structures on top of it and doesn't allow me to edit it in texture painting.
0
votes
2answers
66 views

Texture not showing correctly on specific faces

The front of the box the texture dont work on all sides, but the lid has the right texture. Blenderfile and texture here Best regards Melvin
0
votes
1answer
23 views

Overlap unwrapped texture with transparent image

I'm working on a briefcase and want to make it look like a thread has been woven into it. However the only result I can get is based on the already unwrapped texture. How do I simply overlay, and ...
0
votes
0answers
38 views

BLENDER 2.8 TEXTURE PAINT

I made a low poly model, uv unwrap it, go to texture paint, apply all scales, set a diffuse texture but can't paint on the model only on the uv. Also where did the color picker go in 2.8?
0
votes
1answer
62 views

how to apply texture paint

I drawn his eyes and mouth in texture paint and saved the image as png file However when I go to layout, my drawing disappears. How do I apply texture paint to my character?
1
vote
1answer
24 views

Painting on multiple objects?

Someone might already have asked this but is there a way to Texture paint multiple objects that are not joined? Do I need to be painting each object individually or is it possible to paint on all of ...
1
vote
1answer
129 views

Texture paint showing a random old render on my model

See the following screenshot. I am trying to paint my model but some random artifacts are showing up on my model and makes it hard to see what I'm painting exactly. Deleting my models texture, UV ...
1
vote
1answer
26 views

Can't seem to fix Eyedropper shortcut

For some reason, no matter what file I open, when I press "E" I get a contextual menu about the brush's Stroke Mode, but not the color picker/Eyedropper. I have been using the default Shortcuts that ...
0
votes
1answer
26 views

How do i bake a material onto an image texture?

Just did some texture painting and wasn't happy how the colours turned out so I added a colour ramp in the node editor, is there any way to bake the new colours made by the colour ramp onto the image ...
0
votes
0answers
15 views

Where to Download Missing Textures

Where can I find the missing textures for Blender? You see, I'm trying to color a model of a little girl for Tina in the 3D remake of Barney and the Backyard Gang's Three Wishes video. https://www....
0
votes
0answers
10 views

Missing Textures on Paint

Where can I find the missing textures for Blender? You see, I'm trying to color a model of a little girl for Tina in the 3D remake of Barney and the Backyard Gang's Three Wishes video. https://www....
0
votes
1answer
64 views

I can't paint anymore! Beginner here

I am desperate for help :pensive: I am new with blender and atm working with 2.8. I have a problem while painting. I already know about UVs, unwrapping, saving the image and adding it through the ...
1
vote
2answers
61 views

Unknown Issues with Texture Painting? Not Working? 2.8

new to Blender here so I am more than willing to accept this as user error, however I would really love to learn and figure out what I'm doing wrong. I have watched 3 separate tutorials on youtube ...
1
vote
1answer
173 views

Texture Paint doesn't work

I'm new to Blender and I was painting the texture of my model but I accidentally clicked on F mask brush and now I can't paint anymore. I do not know how to remove this I tried to restart Blender but ...
0
votes
0answers
30 views

When i texture paint in 2.8 how do i add shadows to see what im painting

When i texture paint I like to paint on the actual object instead of the uv map but it seems that when I set up an object ready to paint its all one colour, no distinguishable features so i don't ...
0
votes
1answer
35 views

Sculpture UV & Paint Issue

I'll start this off by saying I'm new to this. I've tried to look this up, but I can't seem to figure out exactly what the problem is. So, I made a sculpture watching a tutorial, and it turned out ...
0
votes
1answer
16 views

Some small parts of the mesh are unpaintable in texture paint

I am trying to paint this leg blue, but some parts can not be painted(the white stripes on the blue leg). How do I solve this? I used smart uv project to unwrap the mesh.
1
vote
1answer
214 views

Painting aligment and texture bleeding even with margin turned on

How can I avoid bleed like this? It's only appearing when I paint in 3D space, on 2D there's no such a problem. I used margin option with different sizes; UV island are separated with wide margin. ...
0
votes
1answer
36 views

Missing layouts in blender 2.8

I recently updated my blender 2.79 to blender 2.8 and I'm missing some of the new workspace layout tabs that they introduced in blender 2.8. I watched several video tutorials on YouTube they seem to ...
1
vote
2answers
521 views

Clone Brush doesn't paint seam

I been having this problem for years and been looking up tutorials and videos and can see people painting away seams super easily. I some times get seams that i can clone brush or texture over without ...
0
votes
0answers
26 views

Looking for a good tutorial on texture painting

trying to just add moss to this rock, I don't really know where to go or what to do from here, when I draw on rock and tab in other view mod it just kills normal where I drew. I want to take a second ...
0
votes
0answers
18 views

Project texture out of view to Selected Polygons/Surface in Blender. - Sketchfab in video doin it

Sketchfab Video wih timestamb (19:25) Hi there, I'm working a lot with measurement and planning PVpanels, it would really help a lot if i could rebuild a House quicker than i am used to atm. But ...
0
votes
1answer
61 views

Texture Paint only draws in black - Blender 2.8

I am new to Blender, so sorry for my inexperience, so I tried Blender 2.8 for the first time. I want to texture paint on my 3D Object but it only draws in black, even though I want to use different ...
0
votes
1answer
1k views

Texture paint brush isn't working

I have an image linked, and I have the right brush selected, but I still can't paint on the object. I tried on another image on the same object just to test and it worked, so I tried deleting and ...
0
votes
0answers
24 views

Texture Painting stuttering

i am having an issue where whilst I am painting (on a new layer, effecting Alpha) the stroke is very 'bumpy', and stutters. I have attached a video to demonstrate. I'm in Look Dev in the video, and ...
0
votes
0answers
22 views

Blender model has white seams in texture

My model has white seams in it when I zoom out, is there anyway easy fix to this? Thank you in advance!
0
votes
1answer
24 views

Texture paint stencil painting color of image

I followed this tutorial but when I finally started painting in this image (made up of black and transparency), the color painted onto my mesh was the black of the image. My brush color was set to ...
0
votes
1answer
36 views

Texture Paint doesn't paint where I want it to

I'm having a problem where I paint on the model, but it paints on the other side of it. I tried unwrapping my mesh with the least amount of stretch as I can, as I am new to this, but it still doesn't ...
5
votes
2answers
3k views

UV image editor, only drawing straight lines

I think that accidentally I pressed some key, and now all I can draw is straight lines in this way. I'm using a digital tablet, the other texture in this same scene paints correctly. I don't know what ...
0
votes
0answers
22 views

How to clone paint a mirrored object?

Whenever I try it paints in perfect symmetry along both sides of the object. Is there a way to stop this?
0
votes
2answers
48 views

texturing 2.8 cant see proportions and profile

I need help with this problem, because when this is irreparably it would be a huge downside of 2.8 and a reason for me to change the program. If I go into TexturePaint Mode my view looks like the ...
0
votes
0answers
46 views

Are custom active tools in texture paint currently impossible?

a while ago I tried adding a custom active tool in texture paint mode. I then got an error which I submitted as a bug. The bug was confirmed, but hasn't been worked on in the last few months. Then ...
1
vote
0answers
20 views

How to make a v-shaped wave after a jet flying over water

Im kinda a beginner at blender, and i dont know how to make a v-shaped wave after the jet in the water. I have tried with texture painting, but it seems i have to subdivide the ocean plane, a lot of ...
8
votes
3answers
11k views

How to fill the selected UV island with colour when texture painting?

I am trying to color parts of the UV map below with the paint function. My problem is that I don't know how to select the square in the UVeditor so to be able to fill it simply with the desired color ...
0
votes
1answer
21 views

my brush setup got destroyed when open in node graph

i'm in texture paint mode and i created a new texture brush, so i click '+' and name it 'stars'. Then i go to far right panel, in the texture tab, i open my new created brush and change type to "...
0
votes
1answer
23 views

Any way of not displaying white mesh border lines in 3D viewport when texture painting?

I'm painting a mesh with two materials, but I don't want to paint over the other materials, so I have the "face selection masking for painting" on. The problem is that it shows these white mesh lines....
0
votes
1answer
101 views

How to draw a for e.g. a grass ground in texture paint within blender 2.8?

So I wanted to draw a gras ground on a plane, but I don't know what i have to change in the Texture Slots and Texture Panel, maybe someone can help me? enter image description here
7
votes
2answers
26k views

Can't paint texture

I am new to blender and I could use some help, i watched a lot of tutorials but I still can't paint an object, I click on the object but it doesn't add color. I enter on texture paint and all the ...
1
vote
1answer
45 views

Where has the “Normal” Texture paint project option gone in 2.8?

I am attempting to project an image onto a model, but faces with a shallow normal to the camera are not receiving protection. The "normal" option used to adjust this in 2.7, how do I do it in 2.8? 2....
0
votes
0answers
21 views

Texture paint brush has gaps in paint?

When I paint it has all these small tiny gaps, what do I do? The more paint I put on, the gaps never fill.
1
vote
0answers
38 views

blender to substance painter help (overlapping UVs)

im new to both blender and substance painter. This will be my first texturing exersize so i wouldnt be surprised if I have missed something simple. but basically my model is comprised of 5 different ...
11
votes
3answers
5k views

Is there a way to paint text onto a texture in Blender?

Recently I have been painting textures in Blender, and I am very satisfied with the results as far as standard painting goes, however I have not been able to find any way to easily add text to a ...
0
votes
1answer
2k views

Texture Paint won't paint on some areas

The texture paint won't let me paint on the mask. It's super weird, and annoying as I need to paint it. I think it might be an issue with the UV mapping, but I can't figure out what's wrong. This has ...
0
votes
0answers
18 views

Question about paint clone projection

Is possible to paint clone a 360 photo environment? I have it mapped as environment (jpeg) but i wish to match some geo to it. But i would like to paint some areas of interest. Any idea how to set ...