Questions tagged [sculpt]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0
votes
1answer
18 views

How to make my sculpting smooth?

I just started blender yesterday and begin sculpting a face. I used dyntopo to add more poly to the mesh, but why is it still pointy? How to smooth it even more? I tried the smooth brush and ...
0
votes
1answer
122 views

How to fix brush tool for sclupting?

My brush tool is not working (not even the grab one). I even tried the clip end solution, changing the values of clip start and clip end. Does anyone here have idea about what´s happening and how to ...
0
votes
0answers
16 views

Sculpt won't work [closed]

I have seen most of the forums on the internet at this point and I don't know what else to do. I've opened seven completely new blender files to attempt again and the sculpt tools just won't work ...
0
votes
0answers
17 views

What is the equivalent workflow for the ZBrush Morph brush in Blender 2.9+ sculpting

An important part of the workflow in my project is to be able to use the Morph brush in ZBrush to achieve an eraser like effect. I can swap between two different shapes of the sculpt ( often "...
1
vote
0answers
25 views

Why is the sculpt tool snapping to my mesh's vertices?

I have a mesh. I am trying to sculpt it, but the tool keeps jumping around, snapping itself to the mesh's vertices. I don't have snapping on. Reset brush doesn't fix it. What causes this?
1
vote
2answers
272 views

my scrape brush is weird

When I use scrape brush on right side, that's okay. But let's go into next photo. This is result of the other side from mirror x axis. This is problem. I would expect to show me the same result. ...
1
vote
1answer
85 views

Boolean modifier's union option keeps meshes inside it's mesh from target mesh

so i'm beginner for sculpting. and i was going to sculpt my character's feet fingers. i was just going to join a cylinder to feet with Boolean modifiers union method. but this happens. it looks ...
2
votes
1answer
45 views

Snake hook in sculpt mode is creating glitch like shapes instead of smoth tentacles

I don't have too much expirience in sculpting, but I have seen on videos i'ts seemingly easy to make smoth tentacles. But in my case what I get are ugly ditortions on ends. I tryed adding more ...
1
vote
0answers
9 views

Sculpt Alpha brush/texture add and substract simultanously

Is there a way to use an alpha brush/texture where the dark carves into the mesh while the white extrudes at the same time. I could only figure out that you can set a brush to add or sub but in that ...
0
votes
0answers
15 views

Why can't I scale or rotate masked parts of my object in sculpt mode?

I'm trying to scale / rotate a masked part of my mesh in sculpt mode, but it does not work. Moving the part is not a problem. I tried to remesh the object and to turn dyntopo on / off. It is not ...
0
votes
0answers
25 views

How to sculpt a continuous brush stroke with python?

I'm trying to deform a mesh using python. My application is to randomly deform thousands of shapes, so I need to use a python script. With the GUI, I really like the ability to hold left-click while ...
0
votes
0answers
16 views

Python scipt: sculpt brush stroke being distorted based on current 3D view

I am trying to write a python script that will programmatically sculpt a shape. When I use the bpy.ops.sculpt.brush_stroke command, I get different results ...
0
votes
0answers
29 views

sculpting with radial symmetry problem!

I'm trying to sculpt this shape using radial symmetry with a value of 4 on z axis while activating the mirror on x axis but I'm getting this distortion!. what I'm missing in the brush setup?
0
votes
0answers
29 views

Dyntopo Resolution Seems Off

So, I'm new to sculpting, and I was following Grant Abbitt's tutorial here: https://youtu.be/lKY2FIy60nc?t=119 His resolution at 20 seems pretty smooth. But, when I try to use that same resolution, ...
0
votes
1answer
123 views

Sculpting Issue: Mesh disappears into another one

I was doing the Andrew Price tutorial (doughnut) and i am stuck in the sculpting phase. I was doing just fine but I think I messed up in the modifier section of the icing. For some reason, when I get ...
0
votes
0answers
12 views

2.83 and 2.9x trackBall navigation mode is a different operation experience, I think it is not easy to operate when carving

I found that the 2.9x traceBall navigation mode has a big change compared with 2.83. Does anyone know why it changed? I think such operating habits should not be changed because of the version...can ...
1
vote
1answer
30 views

Sculpt hard edges mouth

I've been trying to sculpt this mouth in sculpt mode but I can't get the surface to enter enough inside the head or make the more detailed sides... Is there any tip on how to 'maximize' the sculpt ...
0
votes
1answer
58 views

Modeling/sculpting hand

beginner doubt here! I've been staring for this hand for a long time and have no idea how I could sculpt that. Does anyone have any tips for me? I've been modeling for a really short time, so anything ...
1
vote
0answers
65 views

Blender 2.9 Brush import problem

This problem does not happen in blender 2.83 but comes up in 2.90. So I would append the brushes as shown with the fake users Checked. After that, I would be able to see it in the sculpt tab as shown ...
0
votes
0answers
22 views

Hair Particle system is slowing down

After I finished sculpting and retopologizing my sculpt using Insta mesh. I want to create a hair for my character. But however, when I try to groom the hair, it start to lag and slow down. It is ...
1
vote
1answer
102 views

Sculpting cartoon mouth

Hey guys Im trying to make a Jack Skellington blend and I have no idea how to sculpt his mouth, nothing feels right should I just draw his seams on the texture or actually sculpt them or none of the ...
2
votes
1answer
103 views

When I sculpt it doesn't show in object mode

I am pretty new to blender. I am working on this character, however, everytime I switch from sculpt mode to object mode, it doesn't show the changes I made to the object in sculpt mode. I believe this ...
0
votes
1answer
53 views

How to disable Dyntopo by default?

One quick question: How can I set the dyntopo option to be DISABLED by default when switching to sculpt mode? The background for this is, that I don't want my mesh to get triangulated as soon as I ...
2
votes
1answer
79 views

Reverse armature deformation on vertex in python

I have a mesh with armature modifier (active+posed) and wish to do some modifications with vert coords (after armature deformations) saved in shape key on that mesh. But currently it seems not ...
0
votes
0answers
56 views

Sculpting not working on both sides?

Hello so I have been having trouble with this issue I will give an example of my issue It doesn't sculpt on the other side I need some help it is probably simple, but I can't figure it out on my own. ...
2
votes
0answers
9 views

How do i multiply a a sculpt around its own axis?

I am extremely new to Blender and I'm trying to learn how to freehand sculpt using my tablet. I'm a 2D artist trying out 3D. I'm trying to make a single sculpt of a face and then rotate it around ...
0
votes
0answers
35 views

Voxel remesher crashing blender

I have sculpture with uneven geometry. In sculpting workspace, I go to remesh and set the voxel size to 0.007 anywhere below 0.01, then blender hangs. It doesn't work at all, until it closes ...
0
votes
1answer
351 views

missing files blender 2.82 Missing UVs, Textures, detected!

Missing UVs, Textures, detected! Missing UVs, Textures, detected! Missing UVs, Textures, detected! Missing UVs, Textures, detected! the message seems like this, can't use shapes and color pls help ...
1
vote
1answer
88 views

Blender 2.82a sculpt brush cursor shape not fixed

I just updated to 2.82a and it looks like the sculpt brush cursor shape changes with the plane. How do I change this behaviour so the cursor stays in a fixed circle shape? See below.
0
votes
1answer
154 views

How to make nice curvy contour on high detailed (sculpted) mesh?

I run into the problem that I have quite irregular (bumpy) contour shapes from certain angles on my sculpted model. So I have this form: And I want to correct it to look something like this: The ...
0
votes
0answers
33 views

How do i keep sharp edges after combining 2 high poly sculpted meshes?

Not sure how to fix this shading issues and still keep the sharp angles. I found that smoothing tool helps but i loose those angles then. Does anyone know alternative to this?
0
votes
0answers
26 views

Can't use dyntopo to add details + need tips for sculpting workflow

So I made a model then sculped it. Made the basic mesh and then added muscles and some other details in sculpt mode! And now should i add details or retopologize it to make it less heavy then again ...
1
vote
0answers
23 views

“Remesh”, friendly warning… Operation too long… ESC

I just threw myself into a horrible position. I am working on a model and accidentally set a value of 0.0001m voxel-size, instead of 0.01m for a voxel-size in a "Remesh". It would be nice to ...
0
votes
1answer
104 views

Sculpt tool wont work ( Red Cursor)

Hi this is my first post, I have a problem as my textures work in modelling mode but when I switch to sculpt mode my brushes or textures both don't work. Anybody know the answer? Thanks
1
vote
1answer
119 views

Checkerboard Artifacts when Sculpting

I am working through a tutorial and modeling a couch. I'm at the stage where I have been sculpting in fabric details and wrinkles (I am not using Dyntopo). I've noticed that when I sculpt with ...
0
votes
1answer
2k views

Lag in Sculpt Mode

I struggle with lag while sculpting. I am beginner in blender. I created an anvil (from Blender Guru tutorial) it has over 883,200 faces. When I navigate, everything is fine. I only have lag when I ...
0
votes
2answers
1k views

Why is nothing appearing when using the 'Face Set' feature in Sculpt mode?

Learning Blender with Blender Guru. He used a Face Set feature in Sculpt Mode to define different zones on the sofa. When I use the command nothing appears. When I click on my object there is no ...
0
votes
0answers
44 views

Sculpting/Remesh/Hardware Question

This is kind of a broad and long question; sorry about that. So I'm new to Blender and have been having a blast learning it. I really want to take it seriously and get better at it. I've been ...
1
vote
1answer
870 views

Wacky, weird colors when entering sculpt mode (blender v2.83)

Every time I enter sculpt mode, the mesh (which should be grey) is a whole bunch of different colors. I tried changing the metacap, but the stupid colors remain. Any advice would be nice. Picture ...
0
votes
0answers
15 views

Brushes will not append

I am trying to append brushes but when it comes to browsing to the folder containing the brushes I wish to append, Blender alleges that it is not a library. The brushes that I know are there do not ...
4
votes
2answers
133 views

What color space should I use for 16bit sculpting brush alphas?

Since starting to learn sculpting, I've been saving most of my brush alphas as 16bit PSDs. I've noticed though that using the non-color color space instead of ...
1
vote
1answer
115 views

Why is my sculpting brush texture/alpha being clipped?

I am working on a set of brushes that use an Anchored stroke, but the texture used for my brush is not completely showing when I use the brush. If I increase the hardness it helps a little bit, but ...
0
votes
0answers
19 views

Doubt with sculpt pie menu in grease pencil 2.90

I don't know if it's a bug in blender or in my head. In sculpted or object mode of grease pencil, someone knows what function the "active tool" button of selection mode pie menu (alt + w) ...
0
votes
1answer
172 views

Why is the Clay Brush (set to add) actually Subtracting during stroke? (Sculpting)

I am trying to do some sculpting but running into a problem with the default clay brush. I can't tell if this is a bug or operating as intended. Basically, if I use a low strength value, such as 0.200,...
0
votes
0answers
16 views

Blender v2.79 Brush does not go deep enough and is to big

Hello everyone, I'm using Blender v2.79 on a Linux Mint software. I've been following a tutorial on YouTube about how to make donuts. What ever, I'm trying to Brush "F SculptDraw" to make ...
0
votes
0answers
26 views

How can i have sharp edge lighting in marmoset toolbag?

I have this piece in my scene that lighting is exactly what i want but in rendering it's goes blury. before rendereing: after rendering:
0
votes
1answer
28 views

Adding brushes for sculpting in 2.83, missing config folder

So I was able to append the brushes and use them in the sculpt mode. However, some of them didnt work properly, so I looked up how to install them properly. From the zip file im supposed to put it in ...
0
votes
0answers
12 views

How to merge hairlocks into single mesh and sculpt it?

So, I've tried to make hair using curves and I want to merge them so overall shape looks more smooth. I tried to sculpt it but blender just doesn't allow me to go to Sculpting Mode. Is it possible to ...
1
vote
0answers
65 views

Changes made in sculpt mode dont carry over to any other mode

I'm quite new to blender and have been stuck on this for a while, unable to find a fix myself or online and i have to assume im just being stupid or something. Basically i made a 3d model using ...
0
votes
0answers
37 views

Why do some vertices change color when using the boolean add-on in Sculpt mode?

I don't understand why but when I use the boolean add-on and I go in the sculpt mod some of the vertices become purple or green and I don't know how to fix it .