Questions tagged [hardware]
Use for questions relating to Blender's performance and usage of computer hardware.
179 questions
0
votes
1
answer
61
views
2 GPUS render way slower than 1
GPUS I have: 4090 and 1050ti
Blender version 4.2.2 LTS
Some scenes that can be rendered on 4090 no problem can't be rendered when both are enabled because it's out of gpu memory.
The scenes that it ...
0
votes
0
answers
41
views
100% CPU usage when rendering with OptiX GPU only
Specs ^ gpu is 4090
Scene is not complex at all under a million faces, only 3 objects some glass material...
Blender version: 4.2.2 LTS
Render settings correct. I have no simulations or volumetrics ...
0
votes
0
answers
174
views
Is it possible to use GPU acceleration with an Intel® Core™ Ultra 7 155H laptop?
According to Intel documentation, this processor has an Intel® Arc™ graphics GPU. Intel seems to indicate that Arc graphics is able to render cycles. However so far I have not been able to get any ...
- 331
0
votes
0
answers
40
views
Selecting correct graphics card
I've installed blender on a windows machine, but launching it produces the error:
This is despite the fact that I've set blender to use my 3060,
And nvidia's software (geforce experience) says my ...
- 101
0
votes
0
answers
273
views
Installing blender on termux x11 with hardware acceleration
Is there a way to install blender on termux x11 with hardware acceleration?
Anyone with experience please help.
0
votes
0
answers
85
views
Using two GPUs for rendering a single animation
As far as I understand from this question (and its answers), if we have two GPUs then Blender can use them simultaneously for a single rendering job (so this would be two times faster).
I did ...
- 147
0
votes
0
answers
44
views
Can I delete org.blenderfoundation.blender files? / clear space on hard drive
I'm very low on ssd space and DaisyDisk says 357,4 GB are occupied with org.blenderfoundation.blender files.
Can I just delete these? These are not actually System files, maybe its something blender ...
- 33
0
votes
0
answers
20
views
More Viewport windows = slower switching back from Full Screen?
I finally upgraded from 3.6 to 4.0 and immediately noticed a huge impact to my workflow speed when switching back-and-forth between a 4-pane viewport setup and Full Screen. I'm seeing about 3 seconds ...
0
votes
1
answer
53
views
Is this good computer build for my Blender use case? [duplicate]
I've been away from Blender for a few years - I was using 2.79 then. I'm about to buy a new computer in large part to get back into Blender.
I use blender to make models and animations of my own 2 &...
- 3
1
vote
0
answers
16
views
Cubby Long and Cloth Simulation [closed]
There is an idea to create a full-fledged short cartoon about a chibi dude from Shaolin.
The first episode is "A Dude Goes Down a Mountain to Get Water." The sketch can be viewed here. ...
- 347
1
vote
1
answer
541
views
How can I get a temporary fix for a broken 'g' key on keyboard?
I have a hardware issue where it appears that the G key is broken. I won't be able to get into town to buy another keyboard for at least 2 days, but I can't figure out how to remap it properly. ...
- 11
0
votes
1
answer
3k
views
How to fix "Launch exceeded timeout in CUDA queue copy_from_device (integrator_intersect_shadow)" Cycles Error for Nvidia GPU's
i keep having blender cycles randomly crashing (stopping during rendering initialization), i'm using blender 3.6.2 with a RTX2070 and Windows11
- 2,065
2
votes
0
answers
396
views
How does instancing improve render times with Cycles?
I can understand why instancing reduces the amount of memory used since you don't duplicate the polygons of your scene, you simply reference them from multiple locations in the scene.
From a technical/...
- 121
0
votes
0
answers
21
views
Blender beginner looking for a new workstation [duplicate]
I'm a beginner in Blender and looking to buy a new workstation. I currently work on a Mac m1 pro 13". I reached out to a local shop and asked for a quotation for an assembled computer. These are ...
- 21
1
vote
1
answer
84
views
What is wrong with my viewport?
I just installed Blender 3.5 and my viewport is completely wrong.
I can't find anything similar to my issue anywhere.
I've installed AMD ProRender plugin.
.
Not sure if it's a hardware issue either.
...
1
vote
2
answers
899
views
Blender 3.5 not working on my system
I have been using blender on my PC. (Intel i5 processor, 4G ram, internal Intel graphics card, CPU rendering only) Currently, I am using 3.41, but if I try to use 3.5 as a look-see, Bender mainly ...
- 31
2
votes
1
answer
3k
views
Blender can't utilize all 24gb of VRAM (Out of memory)
My system is 3090 Ti (24gb VRAM), 32gb DDR4, i7 8700k, Windows 10.
I've upgraded GPU recently because 8gb of VRAM on my old one wasn't enough, causing out of memory use or crashes in heavy scenes. ...
- 41
0
votes
2
answers
2k
views
Why is my lighting too bright?
I'm not sure why, but in the scene that I'm rendering (My first time, so I'm doing a donut) the lighting just doesn't work. As shown in the image, everything in the light is overly bright, and then it ...
- 9
0
votes
0
answers
512
views
Trying to run blender on a Lenovo thinkpad x270
UPDATE:
Problem SOLVED, I installed a previous version of blender that only requires a two core CPU and now the issues are gone!
Is my computer model too weak for Blender, or is there a fault in my ...
1
vote
0
answers
235
views
EGPU compatibility with Mac?
Due to certain software limitations, I need to use a Mac for Blender. With recent updates allowing for GPU Cycles rendering on Mac, are external GPU's a viable alternative to a PC build in performance?...
- 11
6
votes
1
answer
8k
views
What computer should I buy for Blender? How do I choose hardware? [closed]
I’m using a Mac Book Pro but from what I understand Blender doesn’t work well with any Apple computers?
I’m looking at PC options to use specifically with Blender.
How do I choose a computer to use ...
user92201
2
votes
0
answers
363
views
Screen flicker on mouse over using Blender on Mac Studio
There is a curious flicker to the screen happening when we mouse over the windows of some software using our Mac Studio. For example, the Blender window will go slightly darker when mousing over it, ...
3
votes
0
answers
130
views
Can I render simultaneously both with EEVEE and Cycles on the same GPU without perfomance loss?
Recently while rendering in EEVEE and Cycles I had a look on my GPU usage in task manager.
Unsurprisingly when I looked at CUDA usage when using Cycles it was near 100%, while another tab called "...
- 1,553
0
votes
1
answer
3k
views
Why does EEVEE use so much CPU processing power?
To my knowledge EEVEE is only supposed to use the GPU while rendering. But when I render something and inspect task manager my CPu usage is around 30-50%. As a comparison for Cycles with GPU render my ...
- 1,553
2
votes
1
answer
1k
views
Eevee is not using full CPU power when compiling shader in Blender 3
I'm currently following a texturing tutorial in which I end up making a big and complex node tree.
I just got a new GPU and Cycles is running like a charm with GPU acceleration. In Eevee there is a ...
-1
votes
1
answer
29
views
Poor Graphic Display- Why? [duplicate]
Well I 've been using the same hardware along with the same version of blender before, and never had this issue: The surfaces seem jagged/ semi-transparent. (Please see the picture below.)
The only ...
- 332
5
votes
1
answer
3k
views
Performance impact with complex procedural materials vs image textures?
This is a topic that is somewhat important to me. Let's say I create a complex procedural material with several procedural textures. I could either leave the material as-is, or I could bake it onto a ...
- 1,074
1
vote
0
answers
74
views
Wacom remote not working properly
I'd like to be able to use my wacom remote w/ blender but when I have Windows Ink enabled it lags in the viewport and when I have it off the radial menu function for the remote wont work.
I'd like to ...
- 11
3
votes
1
answer
13k
views
How to Render Faster on Macbook M1 laptop [duplicate]
I am using Macbook Air 2020 M1 with 8GB RAM.
I am just starting to learn Blender, and I am noticing rendering with Cycles instead of Eevee takes considerable amount of time.
How can I make it faster? ...
- 327
0
votes
0
answers
71
views
Cycles doesnt render anything with gpu
When I switch to cycles, I chose my nvidia rtx 2060 (laptop) gpu.
But when I switch to the render viewpoint, the objects are "empty":
I use the newest Linux mint version
And my driver ...
- 1
1
vote
0
answers
1k
views
How do I enable NVENC for video output?
I'm trying to speed up my render times. One option is that I can use Optix, which should have some benefit. The other is enabling NVENC hardware encoding for the video. Strangely though I can't see ...
- 133
0
votes
0
answers
82
views
GPU and CPU usage
I just bought a ryzen 5950x for the sole purpose of sculpting with blender and 64gb of super fast ram.
https://www.youtube.com/watch?v=oCncdv80wmM
This sphere is 25m faces, I'm wondering why when I ...
- 480
0
votes
1
answer
77
views
Where are the Graphics Card settings?
I can´t seem to find the Graphics Card settings under preferences/system. Is this just about the current blender version?
0
votes
0
answers
23
views
Knowing video graphic memory requirements without graphic card
I'm still using old hardware for rendering, I cannot render using my graphic card. I only have 4Gb of system ram. Right now blender say it just use about 4Gb while rendering, but in the task manager ...
0
votes
1
answer
110
views
Why does blender render faster when I’m moving the mouse? [closed]
So this is a bit of a weird question. But I rendered a scene and it took 19.54 minutes, but if while I was rendering it, I clicked and moved the mouse a bunch, it took 17.52 minutes. It’s not a ...
- 622
0
votes
0
answers
2k
views
Slow Workflow with RTX 3060
I am quite desperate, because I just bought a new laptop (XMG CORE 17 - E21qzj FHD i7
16GB 1TBSSD RTX3060 W10H) and I tried to adjust all the settings, but it is just so slow.
Right now I am trying to ...
0
votes
0
answers
398
views
Blender not using full hardware capacity!
I just completed my new computer setup to work extra fast!
Anyhow, while animating a simple cloth simulation with blender, it simulates quite slowly and my task manager is showing me that my gpu is ...
- 31
1
vote
0
answers
47
views
Rendering problem, weird distortion on blender 2.91
when rendering this i face strange issues on some frames like 5 o 6 of 281, they are specific frames,
only happens when rendering final image, but in viewport rendering mode it looks good
1
vote
0
answers
375
views
RTX 3060 Blender long loading texture times. Sometimes crashes
Whenever i import a texture in material preview view blender becomes unresponsive and i need to wait 20-30 seconds before it unfreezes.
Its even longer if i switch from modelling view without textures ...
- 73
1
vote
0
answers
49
views
How can I minimize cpu process without effecting the quality? (MacBook Pro)
I am a MacBook Pro user (15-inch, 2019) and I found out that my device is not a good choice for 3d design. Until I purchase a fine device for this purpose I need to work with it. Do you have any ...
- 121
0
votes
0
answers
40
views
Material preview/eevee 3d view glitches and no compatible GPU found [duplicate]
Blender recently started crashing when trying to use cycles with my gpu, and then when I'm in EEVEE or material preview the 3d view goes weird colours (mainly grey) and duplicates visuals around.
I ...
- 1
2
votes
2
answers
336
views
Backup automatically to a hard drive
Is there a way to automatically save my blender files to my external hard drive when I work from my desktop?
Like saving it to multiple file paths. Someone on the blender community did create an add ...
- 21
0
votes
0
answers
120
views
Why does my computer crash every time I enter rendered mode?
I work on a relatively old iMac (2015) and every time I enter rendered view in Cycles, the Mac just freezes. The mouse wont move and the keyboard is unresponsive. The scene isn't even that complicated,...
- 1
0
votes
0
answers
32
views
Blender 2.8x do not work
I've searched for an answer to my problem and didn't find any. So, I'm gonna ask.
My hardware requirement configuration is at it's minimum; at some aspects, over. So why I can't make Blender 2.8x work?...
- 1
0
votes
1
answer
1k
views
Sculpting/Remesh/Hardware Question
This is kind of a broad and long question; sorry about that.
So I'm new to Blender and have been having a blast learning it. I really want to take it seriously and get better at it. I've been ...
- 1
0
votes
0
answers
340
views
PC freezes while handling Multires high poly scenes before VRAM is fully used
I'm somewhat new to Blender, and lately I've been trying the new Multires for sculpting high detail poly models. From what I had seen online I was under the impression you would be able to reach very ...
- 147
0
votes
0
answers
941
views
Subdivision Surface Modifier freezes Blender. With each subsequent processing for seconds
I am on Blender 2.83. with 8GB RAM, I5 3470 3.2 GHz, GeForce GTX 1050Ti.
I am trying to learn procedural modeling with a tutorial and I've got problems with subdivisions.
If I increase the ...
- 101
0
votes
0
answers
352
views
Blender Renderer only utilizing 1 core in Ryzen 3900x (24-core) CPU
I've been working on a project for work on my local machine that eventually made it to our server (specs listed below). On my local machine and, since troubleshooting the issue, many other coworkers' ...
2
votes
1
answer
519
views
eGPU performance on Linux
I'm looking to improve my hardware, and I have decided to invest in a GPU (like the TITAN RTX, GeForce RTX 2070 Super, or something similar).
I'd like to use this as an external GPU. My question is, ...
- 1,467
1
vote
1
answer
424
views
Switching from Mac to PC - Questions regarding GPU-rendering
I just switched from Mac (macOS) to PC (Windows 10). Since Macs can't render with GPU, I'm new to the concept of being able to render with Cycles using a GPU. However, I have a couple of questions:
...
- 547