Questions tagged [edit-mode]

Use this tags for questions about operations performed on objects when they are in edit-mode, rather than any of the other modes, such as object , sculpt and weight painting.

Filter by
Sorted by
Tagged with
0 votes
0 answers
28 views

How can I model a mop head like this?

Hi Im trying to make something similar to a mop head like this. Im trying to model a character from the Don't hug me I'm scared show. But I couldnt figure out how to model his head.(At least ...
  • 37
0 votes
0 answers
7 views

Using right hand rule to define normal in a surface not working

Currently not getting the normals to point in the right direction based on the right hand rule and the global coordinate system, as shown attached. I have tried selecting the vertices in both CW and ...
0 votes
0 answers
22 views

How to prevent black spot/distortion when creating a new face from verticies?

Here is the before and after of adding a face to a model of a cabinet. All i did was select four verts and press F. Before After
0 votes
0 answers
29 views

Align the corner and make the walls symmetrical in edit mode

Is there any way to even out the wall thickness in edit mode? It is important to repeat the distance between the edges so that the angle is symmetrical.
0 votes
0 answers
12 views

Object distorting in edit mode

I sculpted an object using a multiresolution modifier in sculpt mode, and now I want to try my hand at retopology. The issue is when I go to edit mode, the object looks nothing like what I created in ...
  • 1
0 votes
1 answer
25 views

Highlighting square faces

i have got a question about visual blender help; is there a way to automatically highlight only square faces of the model? So when editing mesh, the faces remain highlighted (like seams are ...
  • 21
0 votes
0 answers
5 views

How to view dimensions (LxWxH) of all objects in edit mode

I have two objects created in object mode. When I switch over to edit mode I'm only able to select and view the dimensions of the object I had selected in object mode. Is this normal behavior or am I ...
  • 1
0 votes
0 answers
10 views

Framerate plummets when moving or editing objects

Blender community, I am suddenly encountering a serious problem when using Blender. When I am simply looking around the scene, Blender runs just fine, at around 60fps. However, when I am either ...
-2 votes
1 answer
27 views

Why do blender crash? [closed]

Hello iam new to blender, when I started to make a high poly mesh it is not responding(blender 3d crashes) I have a 4 gb ram I3 processor 1 tb hard disk laptop is it a reason pls help how to fix it
  • 9
1 vote
0 answers
27 views

Why does part of my object not scale properly between edit and object mode?

I have created a bird and am extruding the wings from the side of the body. I have a mirror modifier set up so I can just work on one side. But the extruded shape does not stay the same when I switch ...
1 vote
1 answer
29 views

How to taper multiple meshes (a radio mast)

I want to create a model of a tapered radio mast which is constructed from multiple meshes (as per attached). The base is 1 metres square and I want to taper the entire object so that the top is (...
0 votes
0 answers
19 views

Rotation in edit mode

I want to make animation of a pant folding.... from top view I have rotated the half side of pant along y axis its good. now I want bottom half of that side to rotate along x to make it half folded in ...
0 votes
1 answer
20 views

Texture Distortion when Separating Mesh

when I separate a mesh (by Selection), I get a texture distortion as in the images below. Same happens when I use "Duplicate" or "Split" Overall goal is to transfer an additional ...
1 vote
1 answer
17 views

Loop Cut Not Going All The Way (No Ngons No Duplicates)

I have a very simple mesh with all quad faces and no duplicate vertices. Still the XY loop cut doesn't go all the way round the mesh. Attaching the blend file for your reference.
1 vote
1 answer
16 views

How to view vertices on model when not showing

I have the model from the bellow image and when I'm entering Edit mode, I can't see any vertices. How can I enable them? I want to remove some parts of it. If I add a simple cube, on that I can see ...
2 votes
1 answer
177 views

How to clean up a project - remove unused materials

I have a project which has become quite messy with some materials which are duplicates eg material names have suffixes of .001, .002 etc which I have worked out how to fix HOWEVER some materials which ...
1 vote
1 answer
15 views

Missing vertices while mesh visible, but still able to select them and edit [closed]

Don't know what I hit, but I know it is not "H" or Tab. I'm still in Edit mode and the mesh is still visible and I can select a general area and it will select the vertex of that area to be ...
0 votes
0 answers
27 views

How to create folds around a cylinder

I am unable to proceed very far in this video for creating folds around a cylinder. The problem arises when one tries to select Random in edit mode which is not available in 3.1. How shall I proceed? ...
0 votes
0 answers
14 views

Separate joined mesh for kitbashing

I have an imported .obj with several pieces that I want to seperate for kitbashing, but instead of doing one by one is there a way to automate it?
0 votes
0 answers
21 views

Unsplit a face in an object or reconnect a face

I'm new to using this app so I'm not really certain what happened, but I think while I was trying to resize or move a face on the y-axis in Edit Mode, I hit Y on the face and split it. And now if I ...
1 vote
1 answer
18 views

How can I see faces in edit mode?

I wanted to make hair on his head which I was going to select faces on top of his head and duplicate so I can place it over his head but I only can see this box and can select this box. How can I see ...
3 votes
3 answers
297 views

how do i make these edges parallel?

hei guys, i am trying to figur out how to make these two sides parallel to each other... you can see in the picture which side i want to be parallel to the opposite side.
  • 41
0 votes
0 answers
14 views

How to attract the yellow vertex loop to the shape of the blue circle?

Does anyone know how could I turn the irregular set of vertex into a perfect circle like the blue one? I thought of using some sort of "attract" command, but I didn't find a way to do that. ...
0 votes
0 answers
14 views

Property panel gone [duplicate]

I dnt know what it's called. But it keeps disappearing. how can I bring it back and make necessary adjustments when I need to? Thank you.
1 vote
1 answer
37 views

How to connect vertices without creating faces?

Here, I have two square grids without any face, and I wanna connect the vertices between the two grids without creating any face. Method I: Step 1: Select all grids, then "Edge" -> "...
0 votes
1 answer
24 views

Cube appearing around mesh in Object Mode, but not Edit Mode

I have this strange cube that doesn't appear while I'm in edit mode. The mesh has a mirror modifier attached to it, but even if I apply it the cube remains. What am I missing here? CUBE No CUBE
1 vote
1 answer
40 views

How remove hair from a model consisting of one mesh

I have found this project and would like to make some changes, I would like to remove the hair but I don't know how to do it. I don't want to remove piece by piece, there is a fast trick? https://...
  • 161
3 votes
0 answers
41 views

What is the "Mode" parameter in duplicate (edit mode) window?

I can't find out, what does it do, never noticed it before.
  • 328
0 votes
1 answer
23 views

Model does not sculpt in one specific area

I purchased this model online (it is a game-ready model that is fully rigged) and when I try sculpting it, it applies the changes to both sides of the model instead of the specific area I want it to. ...
1 vote
1 answer
22 views

Why is the bevel crossing on this edge?

Every time I try to bevel this edge on the left that was made identical to the other edge on the right, it either crosses or only bevels one side of the edge. I have recreated the edge from scratch a ...
0 votes
1 answer
23 views

Issues enabling handles in Edit mode

I'm a beginner in Blender and currently struggling on something that seems basic. I'm trying to move from the ''segment mode'' to the ''handle mode'' to edit the circle but can't seem to find any ...
  • 3
0 votes
0 answers
14 views

when Undo, the Adjust Last Operation can not show adjustable menu [duplicate]

I made a chamfer on a cube and Blender shows the chamfer menu options via the Adjust Last Operation that pops up in the lower left corner. I then adjusted some ...
  • 1
0 votes
1 answer
27 views

How do I smooth only selected surfaces?

I have created a ring by making a flat cylinder and then boolean-ing out a smaller, flat cylinder from the inside. I have long since applied the boolean (including from several other cutouts as can be ...
0 votes
1 answer
18 views

Can't see any object in Solid mode, material mode except the selection silhouette but can see in render mode

As I open Blender I can't see the default cube or any object in solid mode and material mode in object view but can see in edit-view as in the image, I can only see the selection silhouette. I made ...
0 votes
1 answer
37 views

Where are the non-manifold edges?

After reading this useful link and following some of the repair suggestions, I still cannot fix the manifold edges. What is non-manifold geometry? Its not clear to me where the issue lies? I do not ...
-1 votes
1 answer
16 views

rotation and scaling is not working in edit mode in blender 3.2.2

Can anyone please tell me why it's not working?
  • 31
1 vote
1 answer
32 views

How to fill in the rest of this square with faces

What would be the most efficient way to fill in this square with faces in and around the spiral pattern?
0 votes
0 answers
31 views

Join two objects seamlessly

I’ve been using Blender for a few weeks, mostly downloading free assets and creating scenes, lightings, materials and animations, so I didn’t make much practice on modeling and sculpting. I need to ...
0 votes
1 answer
41 views

How to approximate this spiral curve

I am looking to replicate this curve in which my attempt was to use Math XYZ. However, I could not find a way to create a "constant thickness" around each of the spirals. Ie, a duplicate and ...
0 votes
1 answer
12 views

is there a faster way to copy select vertex position from one side to another

Lets say I am making an object with two sides that are symmetrical, lets say over the X-axis, and I need to realign some vertices to match changes I have made on only one side. then I will go to the ...
  • 101
1 vote
1 answer
19 views

A strange crease appeared on my mesh after adding a loop cut

So I'm not exactly sure if it was a direct consequence of creating the loop cut, because it was only after editing (grabbing & moving) it around a little bit that I noticed the crease. Anyway, ...
  • 13
5 votes
1 answer
196 views

How to create vertices between intersecting edges?

In Edit Mode, how do you create vertices between intersecting edges? Are there any shortcuts?
0 votes
0 answers
22 views

Edit mode is too detailed (too many vertices and faces)

I was following a tutorial on how to make a simple living room and everything was going fine until edit mode became too detailed unlike how it was when I was using it at the beginning and this is ...
  • 1
2 votes
1 answer
29 views

Complex Geometry Modeling

I am having trouble modeling this metallic chair: Should I use noise texture plugged in with Alpha channel of Principle BSDF. Like this: But the problem with this is It also affects the corners/ ...
  • 21
0 votes
0 answers
16 views

Align multiple vertex to edge

I need to move the selected blue vertex, along to the green edge.
0 votes
0 answers
17 views

model disappears in object mode [duplicate]

I have applied modifiers and my hat vanished in object mode. how can i get it back?
0 votes
0 answers
15 views

Particle system (hair) orientation problem

I have a hair particle system set up with an object, (feathers). I change how the feathers sit by editing them in particle edit mode. The changes to orientation are not reflected when I leave particle ...
0 votes
0 answers
23 views

Arm bone drivers not moving symmetrically

For context, I am trying to fix this problem I am having with my armature and the rotation drivers of my shoulders. I am using this video for reference. It's a tutorial on how to add shoulder and ...
2 votes
2 answers
309 views

How to make non perpendicular loop cuts

Usually a cut loop goes perpendicular from one side to the opposite and all around the adjacent faces of the shape. However I want to cut slices off all corners of my shape, from side to side and all ...
0 votes
0 answers
22 views

uv_0 and uv_1 looking the same

im very new to blender. I'm trying to data transfer the uv_1 map from another mesh to mine, but it just stays the same as the uv map i did in marvelous designer. I will insert pics to explain better. ...

1
2 3 4 5
47