Questions tagged [bevel]

questions about blender's bevel modifier, text beveling, or the bevel tool in edit mode.

Filter by
Sorted by
Tagged with
0
votes
1answer
28 views

Smooth out a concave edge

Hey guys beginner user here. I'm trying to model a skateboard to get the hand of using blender and I was able to get the basic shape down except I have an edge that is too sharp. I tried multiple ...
1
vote
1answer
16 views

basic bevel on cube not working

I am going through the tutorial and I'm on bevel (I'm a super newb) I have the basic cube chose in the modeling editor I click on the bevel tool and I click the left mouse button and drag to adjust ...
0
votes
1answer
166 views

Bevel Modifier is Not Showing in Object Mode

I've applied a bevel modifier, and set the edge data to "weight". As you can see in the upcoming image, the modifier is working; but only in edit mode: When I go back into edit mode, it looks like ...
2
votes
1answer
55 views

Bevel segments on bevel modifier not working properly

i'm modeling a box with rigging in order to make it easier to get realistic effect but when i use the bevel modifier and increase the segments it doesn't curve the bevel edge it creates the bevel, but ...
3
votes
1answer
256 views

Is there any way to limit Bevel modifier by both weight and angle?

I have an object that I would like to add a 45 degree bevel to but only on some of the edges. If I limit by weight I can add the bevel to the edges I want but it ends up not being the angle I want ...
0
votes
1answer
51 views

Strange Behaviour of Bevel

I hope that someone can help a newb At my learning project, I got an mirror modifier acive. Than I added some cubes and played with them. To learn something about cylinders I added one - yes firsttime ...
1
vote
1answer
55 views

Creating geometry based on the transparency of a PNG image

I'm importing a PNG icon as a plane, but the problem is that the plane imports with the transparent background, making it a square plane. I don't want my plane to be a square, it should just be the ...
2
votes
2answers
112 views

Beveling a rounded corner until the beveled edges meet at a point

I'm trying to continue beveling this rounded corner until it meets at a point without beveling too high on the z-axis. If I use percent and set it to 100.00% it only works on the two long sides and ...
1
vote
0answers
33 views

Bevel Shader Appears Inverted

I am trying to create a simple rounded edge on a bunch of meshes but everything I have tried has resulted in the below image. The steps taken are: Add Bevel Modifier. UV unwrap see image Add Bevel ...
1
vote
1answer
28 views

Bevel Start End on Circle Curve, Blender 2.83 not working

The Bevel Start End does not work on closed curves. I need to partially bevel a profile on a circle. The circle curve added by Add->Curve->Circle is closed. Duplicating a vertex and manually re-...
2
votes
1answer
17 views

Bevel tool creating unexpected geometry

I am having problems with the bevel tool where blender creates unexpected geometry. I have two examples where I don't understand why things are going wrong: Number 1: I tried to create a revolver ...
0
votes
1answer
19 views

Bevel in Solidified Plane

I created a plane and started working on it's corner to add some radius. Now I want to smooth the edges (perimeter) of the plane. I tried to use Bevel but I am unable to do this as soon as I solidify ...
0
votes
1answer
27 views

Can I bevel this shape cleanly?

I'm modelling a curved shape, and I'd like to bevel the edges. When I try to do that, the faces pucker. I've tried smooth shading the model, but it prevents any bevels from showing. Do I need to fix ...
0
votes
0answers
18 views

bevel problem, how can i fix a gaps in an object?

I always had the same problem whenever i try to bevel an object My object looks like it had a gap on it, is there any possible way to fix this kind of thing? thank you for answering!
0
votes
0answers
15 views

Multiple bevels with changes in direction?

I am completely new to Blender and 3D modeling so I am sure my question has a basic solution. I am attempting to model conduit for a rocket. The conduit has slightly beveled sides (easy) but then has ...
4
votes
0answers
30 views

Modelling a full Windsor knot on a necktie

I'm trying to model the steps involved in tying a full Windsor knot. The very first step is getting the fatter/thicker end through a loop. In my model, towards achieving this first step, I reached ...
0
votes
1answer
20 views

How to use bevel node without joining objects?

I have an object with modifiers, it is a bit complex, it is intersected by another object that is CAD modeled (it does not have a good topology), My idea was to use the bevel node to smooth the ...
0
votes
1answer
85 views

“Ctrl B” Bevel operation performance is slow in 2.8

When I bevel anything with less then 30K Vertices, it lags really bad in 2.8. What use to take me 5 seconds to perform now takes me, sometimes, a minute to do. Thoughts?
3
votes
2answers
579 views

Beveled Plane Not Circular

I'm going to be creating a large number of 2D rectangles with rounded (beveled) corners. I was all set to use Ctrl-Alt-B on the corner vertices of a plane when I found that the bevels created are not ...
0
votes
0answers
17 views

Is there a solution to combining bevel with subdiv?

The scenario is I have an object that needs beveled edges, but simultaneously I want to use micropolygon displacement, which requires adaptive subdiv. The problem is that bevels and subdiv surfaces do ...
2
votes
1answer
941 views

Bevel (modifier) each individual vertex

Is there a way (addon or similiar) to bevel vertices individually. The Bevel modifier clamps all vertices the same, I would like it to clamp each vertex individually. This is the behaviour I would ...
1
vote
1answer
33 views

Apply subdivision surface modifier to one axis only (round edges)

I have a mesh in Blender cut such that when I apply subdivision surface modifier, it will become round in the places I want it to. Here's the mesh created by using loop cuts on a basic cube: Here's ...
3
votes
1answer
143 views

Blender 2.83 : Edge Bevel not round

I'm new to Blender. I'm using Blender 2.83 and I saw in some youtube tutorials that you can make a cube's edge round using bevel (edit mode), however I wasn't able to replicate it. Here is what I did:...
0
votes
1answer
86 views

how to make an hole into my object?

I have an 3d skull face and I got my eyes and nose merge into it. But I can't an hole into my face like carving my nose and eyes. I think it's because I fill my skull face with the beautify grid ...
0
votes
2answers
57 views

Bevel shader issue

I recently found out about the bevel shader, but when I tried it, it doesn't seem to work. It appears to give me a mix between beveled and not beveled. See attached image. Anyone know what I'm doing ...
2
votes
1answer
14 views

Curve the transition to an inset face

I'm attempting to replicate this geometry: The main difficulty is curving that middle section. I have this currently, but am stumped on trying to graduate between the 2 selected edge loops: Instead ...
0
votes
1answer
709 views

Bevel node, baking normal map problem

bevel node is still under development, but maybe somebody know how to fix problem when baking bevel node into normal map, there are a lot of gray dots on the map. Everything else working well, awesome ...
1
vote
0answers
81 views

Bevel direction

Does anyone have any clue how to control the bevel directions for Blender2.8? Whenever I try to bevel an edge that is connected to another vertical edge, the bevel tend to not go towards x,y,or z axis ...
1
vote
2answers
93 views

Advanced bevel of a rounded corner

I've been racking my brain about this. I've been trying to model this relatively simple handrail but there is one part where I am just stuck. Here is the reference: Now I sort of tried to bevel the ...
1
vote
1answer
125 views

How to round the edges of a mesh with small faces?

I'm trying to round the edges on the top of this model. Inner (90˚) edge is easy – I can just apply a bevel modifier and limit by angle. I'm having trouble with the outer edge. The bevel modifier ...
0
votes
1answer
48 views

Bevel object: disproportionate

I use a bevel object to contour the shape of a bezier curve - why is the bevel object disproportionate compared to the final shape?
0
votes
0answers
20 views

curving a 3 dimentional curved object

I have a curved 3 dimentional object and I am trying to add a bevel/curve to one of the corners on each side, and the leading edge. I can play around with the edges and vertices and get the curve I ...
0
votes
2answers
60 views

Clean topology with holes in a mesh with bevel modifier?

So this question today is not just how to make a hole, but I'd like to know what's the correct way of making a number of holes on a mesh having a clean topology. I have seen numerous tutorials with ...
3
votes
1answer
35 views

How to fix an artifact affecting a bevel modifier

This is me yet again. I am trying to work non destructively with the use of bevel modifier. I managed to bevel only by weight and adjust the weight of desired edges. However, now when I try to ...
0
votes
0answers
14 views

Bevels Edges/Curves Don't Align [duplicate]

I am trying to bevel the corner of a cube, but the depth of the bevel for each edge of the corner is different. Figure 1 shows how'd I like the longer edge bevel to look. Figure 2 shows how I would ...
4
votes
2answers
177 views

How to apply a bevel modifier, so that it affects only specific edges?

I am trying to apply a bevel modifier to a box with some additional buttons, however, I am struggling to apply the bevel modifier only to the top face and the edges that are connected to that face. In ...
0
votes
2answers
31 views

Bevel sharp corners

When I bevel the corners of this object, they overlap each other. Any suggestions how to prevent this? Thanks in advance :)
0
votes
0answers
13 views

Can't “curve bevel” imported SVG [duplicate]

I'm trying to Object Data Properties > Geometry > Bevel some SVG imported curves, but it doesn't work as expected. It looks the bevel (either by parameters or Object) are projected in 2 dimensions ...
0
votes
0answers
11 views

Bevel Edges Aren't Clean and Matching

I am looking to bevel some intersecting edges, but the bevel distorts the geometry at the corners. How can I change this? In Solidworks and AutoCad this never happens, the bevels align with edges and ...
0
votes
1answer
17 views

How do you add beveled circled to flat planes?

I have a flat plane that I added some width to, and it's going on a machine. The plane will need four screws in all four corners. What's the best way to do that in 2.82a? I thought about just ...
0
votes
1answer
601 views

modeling with curves (coming from C4D) [closed]

I'm learning Blender, coming from some basic experience with Cinema 4D. C4D leans heavily on spline-based modeling, and I'm trying to transfer those skills into Blender's curves when appropriate — e.g....
1
vote
1answer
39 views

Bevel Edge after Boolean Difference

I used a Boolean operator on a cylinder to punch a hole through my vase (see image). I want to bevel the edges of the hole. How can I do this? The vertices of the hole don't align with that of my vase....
1
vote
2answers
57 views

Bevel Weight on edges

What is significance of Bevel Weight? In what circumstances it should be used and how it changes model geometry?
1
vote
1answer
34 views

Bevel modifer troubles

I'm teaching myself how to model in Blender and struggling a bit with the bevel modifier. Basically I want to round off the outer edge of the bill of my hat. I expected this to be pretty simple but it ...
0
votes
1answer
149 views

how to bevel this?

I extruded this curve out of an svg and converted it to a mesh. I cant find a way to bevel the marked edge. Both the bevel modifier and the "normal" Bevel tool dont show any affect. why? How can I ...
0
votes
0answers
24 views

Bevel doesn't work properly [duplicate]

i'm a beginner in Blender. I'm making a school assignment where i need to use the bevel. When i try to bevel a corner, instead of only rounding the corner, it goes further than only the corner i've ...
1
vote
2answers
90 views

How to bevel a flat surface?

Is it possible to bevel a flat surface using the bevel tool? Here is my object (a simple ramp): and I want to curve this ramp object but the bevel tool doesn't work on flat surfaces: [ the bevel ...
0
votes
2answers
514 views

Bevel and Subsurface makes concave corners weird

In hard-surface modeling there are often sharp edges and smooth, flat areas side by side. To get smooth areas, subdivision surface modifier is used. Edges that need to stay sharp, must be surrounded ...
2
votes
2answers
130 views

Intersections in 3d model

How can I remove some intersections in my model? They cause wrong slicing for my printer. The model consists of a path curve and a profile curve. I use the bevel in the path curve with the object the ...
0
votes
0answers
24 views

Marmoset Toolbag or modeling problem

The models that I modeled using bevel and boolean in Blender are malfunctioning when I throw them into the Marmoset Toolbag. How can I fix this.

1
2 3 4 5
8