Linked Questions

0
votes
0answers
20 views

How do I adjust segments and rings on a UV Sphere? [duplicate]

I'm working with a UV Sphere and I need to adjust its segments and rings. When I first added it to the scene a menu called, "Add UV Sphere" appeared. Unfortunately, the menu then went away. ...
0
votes
1answer
19 views

How to re-access properties panel after misclicked by accident? [duplicate]

I usually change the segments & rings at the properties panel after generated an object. The problem is when I misclick, it disappears and couldn't find re-opening option. I have to delete the ...
0
votes
0answers
13 views

object operation presets have disappeared [duplicate]

Is there a way to get the operation presets of a primitive object back? For example, I added a torus and I want to adjust its inner radius, but I can't do that because the operation presets have ...
0
votes
1answer
44 views

A.N.T. Landscape Interface [duplicate]

when I first open a landscape mesh, I can see the mesh interface (large yellow box), and I can minimize it (small yellow box), but when I click off the mesh, the interface disappears and I cannot find ...
1
vote
1answer
19 views

How should I get the “add” properties back after clicking? [duplicate]

Sorry if this is somewhat of a noob question, but I want to know if there is a way to get these properties (shown in picture) back after clicking somewhere and getting rid of them. For further detail,...
1
vote
1answer
37 views

Annoying tool settings overlay [duplicate]

I'm coming from ~18 years Maya usage and I'm relatively new to blender, so I'm heavely used to a construction history, which blender doesn't have. My main problem is: everytime I add a new object e.g.:...
0
votes
1answer
27 views

Editing Spiral Curves 2.92 [duplicate]

Is there still no way to edit the turns of a spiral form after creating it? (Blender 2.8+ Editing Spiral Curves) I tried using F9 (Adjust Last Operation) but I just get a notification that says Toggle ...
0
votes
0answers
12 views

How to change math function after closing "Add function surface" [duplicate]

When I choose to add Z or X, Y, Z function, "Add function surface" menu appears in the bottom-left corner. But once I click outside the object it disappears and I can no longer change the ...
0
votes
1answer
37 views

object context menu [duplicate]

I was wondering how I can bring back the object menu table after it disappears. When I add an object this object menu appears, but if I click somewhere else it disappears and I can't find a way to ...
0
votes
0answers
19 views

Missing menu in xyz math extra objects [duplicate]

I am using version 2.9 I have looked at several videos and posts, but do not see this problem. I lose the menu when using the xyz math functions. see: https://youtu.be/t_ht2uAW9Lg Thanks for any help.
0
votes
1answer
57 views

How do you create a simple single vertex mesh with no actual faces whatsoever?

In link How to edit Parameters for an Object after it is created?, it is suggested in one of the answers to begin a workaround by "Create(ing) a simple single vertex mesh with no actual faces ...
0
votes
0answers
18 views

Add a new mesh object while also specifying its vertices count during creation (in 2.8 and later)--yet how to edit that same vertex count afterward? [duplicate]

For example: Object Mode!Layout!Add!Mesh!Cylinder. Then, in lower left of the viewport, the dropdown Add Cylinder!Vertices is where you can change the number of vertices on the curve that comprises ...
1
vote
3answers
145 views

How to interactively add vertices based on custom input fields?

I want to make UI with input fields and a button which add verts with coords based on values in this fields. I kinda almost understand what I need to do but it slips away because I am not a programmer....
1
vote
0answers
30 views

How do you adjust loop cuts/edge loops after the fact [duplicate]

I have some loop cuts. I have clicked around and done a few more things and now I want to adjust the amount of loop cuts I made a while ago. How do I go in and edit the count of them?
1
vote
0answers
12 views

How can I edit bevel parameters on a mesh object I created last week? [duplicate]

Blender 2.90.1 on Windows 8.1 I created a simple mesh object last week (Plane.002 - default name), extruded it to make a rectangular solid, then I edited one of the edges (CTRL+B) with a nice 3-...
0
votes
1answer
140 views

How to reopen the panel that shows when creating objects? [duplicate]

When creating objects a panel shows on the left bottom side, like this. And sometimes I click other objects or hit Tab going to edit mode then realize I need to tweak some properties on that panel. ...
0
votes
0answers
14 views

How to lock a menu (specifically Sapling Tree Gen)? [duplicate]

I am trying to play around with the Sapling Tree Gen Add-On, which allows me to create trees and modify them. But the problem is that the settings for the tree were in the Toolbox on the left (opened ...
0
votes
0answers
27 views

Mesh -> Math Function: Edit Dialog [duplicate]

How do I pull up the Edit Dialog after it closes? I have enabled Math Functions and it works fine; however, after I initially enter my settings in the dialog ("Add Z Function Surface"), the ...
0
votes
1answer
1k views

I want to increase the number of vertices in a cylinder [duplicate]

I want to increase the number of vertices in a cylinder I have a version of 2.90 in blender. Does anyone know how to do this?
1
vote
1answer
44 views

Regain Blender Parameters Menu [duplicate]

This question should apply to functions besides "Add Spiral", but this is just what I'm working on at the moment. In my example picture, I created an Archimedan spiral (Add > Curve > ...
0
votes
0answers
8 views

Solved - Pop Up Dialog gone after insert a Object/ Mesh when click in free Space then, how to bring it back? [duplicate]

Win 10 Its a Beginner Q. How to get this Popup Dialogbox back? Or where i can find that Object Parameters? I insert Object via Shift+A. The Popup instant open also, but if i click in a free Space the ...
1
vote
0answers
18 views

Redo panel (F9 menu) gone forever? [duplicate]

Imagine, you add an object to the scene and you get the redo-panel (F9 menu). If you want to modify the options of the newly created object but you mistakenly click elsewhere, the menu disappears. ...
0
votes
1answer
123 views

Automatic "Edit Window" popup - Blender 2.8

How to you make the window that pops up when you Move, Rotate, Resize, Extrude etc., to set specific options, popup automatically before making a change? If I'm about to use proportional editing and I'...
1
vote
0answers
11 views

How to recall the window with the original creation settings of an object [duplicate]

After I place, for example a new mesh, and do any actions after that it is impossible to recall again the settings in the picture. I know there is a way but I was not able to find an answer to that. ...
0
votes
0answers
19 views

Increasing Amount of UV surfaces after sphere creation [duplicate]

In Blender 2.79 when you create a UV sphere the Add UV sphere menu pops up. As soon as you interact with the object in any way your ability to change the amount of segments and rings disappears. My ...
0
votes
0answers
13 views

How do I show the left hand side bottom box [duplicate]

How do I show the left hand side bottom menu which is present right after Shift-A added object Torus once I've closed it? It should be labelled Add Torus in this case.
0
votes
1answer
128 views

How I can change the object properties after I add it in the scene and move it? [duplicate]

Suppose I add torus in my scene, and I change in the Minor segments from 16 to 3. In addition, I made many actions such as scaling, rotating and moving the object. How I can return to the Minor ...
2
votes
1answer
176 views

How to re-open operator tab

I just want to reopen with a hotkey, I alredy know that I can open it after we work with.
1
vote
1answer
112 views

How to get back the 'Add <Shape Name>' menu after performing any other action? [duplicate]

I would like to know how I can get back the 'Add ' menu which disappears after performing any action. I tried F9 key, F6 key and T key which I knew after some Googling but they didn't dork. I'm ...
3
votes
1answer
2k views

How to change number of vertices for cylinder after created it? [duplicate]

I've created a cylinder object which is fine at first. But as modeling goes by I've decided to change some properties,like number of vertices, of the cylinder just to see it in real-time. But cannot ...
1
vote
0answers
313 views

Operators panel missing [duplicate]

I wanted to make my very first blender donut yesterday. I have ver 2 82.7 When I add the torus it pulls up a floating menu where i can amend size and segments. When I click anywhere else this Add ...
1
vote
0answers
14 views

Editing number of steps in spin [duplicate]

Once you apply spin to a bezier curve with a set amount of set amount of steps, is it possible to go back after switching over to object mode and increase/decrease the amount of steps?
0
votes
2answers
76 views

XYZ Math Surface equations revision [duplicate]

Is it possible to revise XYZ Math parametric equations without deleting the object and starting over?
1
vote
1answer
756 views

Editing a primitive's values AFTER initial placement [duplicate]

first time posting in here so please forgive any protocol mishaps, I will try to adhere to the rules as much as possible! So this is an often asked question and I'm not so sure how or why the ...
0
votes
1answer
1k views

I can't change the parameters of a primitive after creating it in Blender 2.8 [duplicate]

In Blender 2.7 you could achieve it like that: How to edit Parameters for an Object after it is created? In Blender 2.8, when I create a cylinder for example I see the window to change the parameters ...
4
votes
3answers
5k views

Create Circle with Inner Radius

Is there a simple way to create a circle which contains a hole / inner radius. Ideally where I can dynamically set the inner radius when adding (in the same way I can set outer radius when adding a ...
0
votes
1answer
57 views

How to change parametric object attributes after creation [duplicate]

Once a cylinder is created, how to go back to its attributes ? "Vertices, Cap Fill type etc.."
1
vote
1answer
112 views

Reducing the number of vertices [closed]

I am trying to reduce the number of vertices by the tutorial and when I press f6 like the video says nothing happens and the bar does not appear? CGC Classic: Female Character Modeling Pt. 2 - Major ...
0
votes
1answer
28 views

Is it possible to add key frames to initial shape setting?

when you first create a shape it asked you what you want to input for creating different variation of a shape, but one you click away those setting are gone forever. Is it possible to insert key ...
0
votes
0answers
104 views

How can I access "Object Parameters Tool" again after it's disappeared?

Once I finish playing around the parameters, as I click aside, "The Object Parameters Tool" (I don't know how exactly it's called) disappear, and I can't find it anywhere to access it again. Please ...
0
votes
3answers
5k views

Add menu for primitives in Blender 2.8 [duplicate]

Is there a way to bring back the add menu that pops up in the bottom in Blender 2.8 when adding primitive object to your scene to change vertices?
0
votes
0answers
145 views

taking a manuel bastoni character to another file

I wanted to test creating a character in another file, and now that I am satisfied with the character I wanted to move it to the original file, I used manuel bastioni lab for character creation but ...
1
vote
1answer
3k views

How do I scale a Torus's minor radius?

I have created a Torus and I've already been working a lot on it. But now I realized that its minor radius is too big and I need a way to scale it down after it has been created.
0
votes
0answers
258 views

Interactive Creation [duplicate]

Interactive Creation You can position and scale primitives as you create them using your mouse, without having to use transformation tools. This options in Maya. Is it possible to make such an ...
0
votes
0answers
22 views

I am not getting the minor radius for even after scrolling down. [duplicate]

when i am selecting torus this(image attached) is what i am getting and there is no option of changing minor radius.
1
vote
0answers
46 views

Sapling addon panel back [duplicate]

When I select another object and transform it the Sapling tree generator panel is gone. I can't get it back when I reselect the tree. Is it possible at all to have the panel back?
1
vote
0answers
14 views

How can I change segments after I created an object? [duplicate]

I have started to learn blender. I have a problem with re-changing segments. When I create an object, object panel gives options at left bar but if I close that panel; I couldn't reach it again. I ...
1
vote
0answers
30 views

pannel Landscape [duplicate]

Dear Blender community, I am new in Blender, and I build the landscapes for some specific application. After creating Landscape (Shift+A, Mesh -> Landscape), I lose the panel "Landscape." Do you know ...
1
vote
0answers
949 views

Sapling tree add on, can edit the trees after doing something else? [duplicate]

I'm working with the blender-version v2.77 and I'm making one of my first trees with the sapling tree add on. Does anyone of you know if you still can edit the trees after doing something else? So for ...
1
vote
0answers
14 views

Edit Equation in Extra Objects Add on [duplicate]

When using the extra objects add on, I can create the shape (sine wave) I want by inputting the correct function. Once I move onto another object, I can't reopen the options for changing the equation/...

15 30 50 per page