1
$\begingroup$

I have made the mesh and added solidify modifier and applied. But later i thought to increase the thickness. So now i want to remove thickness so that i can added the solidify modifier again. I want to know is there any quick remove thicknes. When i select the edge then ctrl+ the selection goes downward not to single face. So i want to know a quick way to decrease thickness. Any suggestion or help.

enter image description here

enter image description here

$\endgroup$
  • $\begingroup$ Why did you need to apply the modifier? $\endgroup$ – cegaton Jun 17 '17 at 18:01
  • $\begingroup$ I had the same problem. Then i used "C" to select all external faces, so with all of them selected I press "Ctrl+i" to invert selection. so All of the internal faces could be deleted faster than i could imagine :D $\endgroup$ – Lynae Jan 14 at 23:44
5
$\begingroup$

You will need to manually select the edge loops around the boundary, still using the alt-click to select them in vertex select mode until they are all selected.vertex select Then you will need to change to face select mode, and delete the faces.face selectfaces deleted Then you will need to select a face on the surface you want to delete single face selected and press L to select all linked faces full selection and then delete them, leaving your original surface ready for editing.final surface

$\endgroup$
  • 4
    $\begingroup$ You don't need to "manually" select the faces joining each side. In face select mode you can Alt-Click next to a small edge between two sides to select all the faces around the mesh, in vertex select mode Ctrl-Alt-Click does the same. Repeat that for the hole that also joins both sides. Then use Select Linked. $\endgroup$ – sambler Jun 18 '17 at 9:58
  • 1
    $\begingroup$ Except that doesn't take into account ngons and extra geo that doesn't allow for automatic selection - my example is simple but the solution is for anything complicated imho. $\endgroup$ – Craig D Jones Jun 18 '17 at 22:35
  • $\begingroup$ Given that he applied the solidify and wants to undo it, I wouldn't expect any quads or tris along the edge. $\endgroup$ – sambler Jun 19 '17 at 0:29
  • $\begingroup$ "still using the alt-click to select them in vertex select mode until they are all selected" is what follows the instruction to manually select them - this is the same as what you are saying, no? And this is as generic as possible to apply to the errant searcher for the same kind of solution with possibly not the same mesh scenario (booltool, hardops, etc). $\endgroup$ – Craig D Jones Jun 19 '17 at 2:51
  • 1
    $\begingroup$ Well just suggesting that Ctrl-Alt Click should select them all in one go, while in face select mode Alt-Click should too. $\endgroup$ – sambler Jun 19 '17 at 3:07
0
$\begingroup$

If you have just applied the modifier, use Ctrl Z and cancel it with the "×" button. Use Ctrl- F > Solidify instead as you can readjust the thickness as many times as you want before you okay it.

$\endgroup$
  • 2
    $\begingroup$ Using Ctrl+F will destructively change the mesh and changes won't be undoable after operator options go from the Last Operator panel. Modifier at least allows for non-desctructive workflow (if not applied). $\endgroup$ – Mr Zak Jun 17 '17 at 17:49
  • $\begingroup$ @Mr Zak But it can be undone when they're there. So... Sometimes you don't want to do complex things using modifiers and Ctrl + a letter is enough. $\endgroup$ – Lukasz-40sth Jun 17 '17 at 18:23
  • $\begingroup$ Yep, it can. Pretty much like any modifier. $\endgroup$ – Mr Zak Jun 17 '17 at 18:36

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.