I want to enable GPU rendering, but there is no option in User Preferences > System:
Why is this? How can I get cycles to render using my GPU?
Blender Stack Exchange is a question and answer site for people who use Blender to create 3D graphics, animations, or games. It only takes a minute to sign up.Sign up to join this community
Ensure GPU Support
Currently cycles supports CUDA (Nvidia) devices and has experimental support for OpenCL devices as of 2.75 (added in
B7f447). If you are using an AMD/ATI graphics card, see the OpenCL section below. If you are running an older NVIDIA card, ie the Geforce series, support is extremely limited and these are not officially supported, see How to enable GPU rendering on older Nvidia GPUs?
Cycles only supports CUDA GPUs with a CUDA compute ability of 2.0 or higher. To use CUDA, check to make sure your GPU is on this list of CUDA capable GPUs and has a ranking of at least 2.0.
Install Latest Drivers
If your GPU has a CUDA compute ability greater than or equal to 2.0 and you still don't have the option to enable GPU rendering, you can check a couple more things:
Ensure you are using the proprietary drivers distributed by Nvidia and that your GPU drivers are up to date.
If you are compiling Blender from source, ensure you have the CUDA development toolkit installed.
Below are instructions for various operating systems. If you are still having issues after trying all the steps listed in this post, try asking for support on BlenderArtists.
This site is not well suited to localized troubleshooting discussions often needed to untangle unusual hardware/driver issues.
Run as root
Due to an issue with some versions of the nvidia drivers, you must run blender (or any other program which uses cuda) as root before you can use any cuda features as a normal user. See this thread for more detail.
Open your driver manager and select the recommended driver and Apply Changes.
You can also use the terminal to install the latest stable driver.
$ sudo apt-add-repository ppa:ubuntu-x-swat/x-updates $ sudo apt-get update $ sudo apt-get install nvidia-current
For linux Mint, Ubuntu and Debian variants (and maybe other distributions) you will need to install the package nvidia-modprobe which will detect your nvidia CUDA device and make it available for blender. Read this answer for further instructions
Please note that these instructions were put together in June 2015 on Debian Jesse. Although Debian is a very stable distribution, it isn't unlikely that this will be out of date on Debian Stretch. If you have more up to date information, please feel free to edit this.
Before we can install the drivers, we will need to install the kernel headers from the
contrib nonfree repository. If this repository hasn't been added already, open
/etc/apt/sources.list with nano:
$ sudo nano /etc/apt/sources.list
deb http://http.debian.net/debian/ jessie main contrib non-free
For Debian to recognize the repository, we will need to refresh the package list:
$ sudo apt-get update
Once this is done, the headers can be installed:
$ sudo apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') nvidia-kernel-dkms
sed magic, this will install the correct headers for your version of the kernel.
Now we need to blacklist (disable) the open source nouveau driver. To do this, we will create an Xorg configuration file:
$ sudo mkdir /etc/X11/xorg.conf.d $ sudo echo -e 'Section "Device"\n\tIdentifier "My GPU"\n\tDriver "nvidia"\nEndSection' > /etc/X11/xorg.conf.d/20-nvidia.conf
And reboot the computer.
All that is required afterwards, is to install cuda:
$ sudo apt-get install nvidia-cuda-toolkit
For more in depth information, please see https://wiki.debian.org/NvidiaGraphicsDrivers (only covers the drivers, not cuda). If you are running a GTX 970 or 980 you will need a special build of cuda available here.
Identifying your GPU:
From the Arch wiki:
If you don't know what GPU you have, you can find out by running:
$ lspci -k | grep -A 2 -i "VGA"
Drivers and CUDA:
For Arch Linux, installing proprietary Nvidia drivers for your GPU can be as simple as installing the nvidia package and then rebooting:
# pacman -S nvidia # systemctl reboot
# pacman -S cuda
Find out what GPU you have in the Device Manager. Go to Start -> Control Panel -> System and Security -> System -> Device Manager), then open the Display adapters tree.
To find out the architecture of your Windows installation, open a command prompt (search for
cmd in the start menu) and run
wmic os get osarchitecture.
Alternatively, you can get this information from a GUI by going to Start -> Control Panel -> System and Security -> System or by using the keyboard shortcut Windows KeyPause.
Go to the Nvidia Website and select your driver.
Finally, download and install the proper driver for your architecture. I am assuming you know how to use installers.
If you're running Blender on a notebook with Nvidia Optimus, make sure it uses the dedicated GPU. Either configure Blender to always use the dedicated over the integrated GPU in the Nvidia Control Panel, or right-click
Blender.exe (or a shortcut to Blender) and select the Nvidia GPU in the the Run with graphics processor menu:
Install the latest Nvidia Driver for you graphics card. You can download them from the Nvidia website.
Open the CUDADriver.pkg file by double clicking it.
Go through the installer.
If it installed correctly, there should be a new CUDA option in the System Preferences (the only time you need to go here is to install updates):
Finally after you have installed your drivers:
Restart your computer
There should now be an option in the Blender's settings allowing you to select CUDA and your GPU:
Then select the GPU in Render settings > Render > Device:
On Ubuntu/debian you may need to install ocl-icd-opencl-dev package
To get OpenCL working for nvidia GPUs, ensure that the
opencl-nvidia package is installed:
# pacman -S opencl-nvidia
Then run blender with the environment variable set to 1:
In the User Preferences > System there should now be an OpenCL option:
If it's selected, rendering on the GPU will now use opencl. Note that the first time you try to render, blender will have to first compile the necessary kernels which may some time.
Also note that you need to change 2 settings to enable GPU rendering. The obvious one is in the User Preferences, System. You also need to set it for the blender file (scene) by clicking on the camera icon (on the left) in the Properties window and under the Render section is a setting for Device.
The huge answer above was solution to some of my problems for enabling GPU for Blender with NVIDIA drivers in Ubuntu or Ubuntu-based distros, but it didn't always work on some cases.
So, I wrote an article for myself that has always worked since. It has a lot of the info mentioned here, but for me it's a simple straightforward way to go:
I hope it could be of help for someone in addition to this whole thread :)
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?