2
$\begingroup$

enter image description here

Wanted to make the right loopcut have the same spaces between the edges and the loopcut just like the left one. how do you have the absolute spaces cuz i want to make a table and 2 of em have to have the same spaces or it would look weird. my question is how to make the same spaces like the left one so the right one can have the same spaces between the edge and the loopcut. Thank you

$\endgroup$
5
  • 1
    $\begingroup$ suggest mirror to other side, otherwise you need check the one side distance and loopcut to corner (factor=0 or 1) and then offset the distance. $\endgroup$
    – X Y
    Commented Apr 18, 2022 at 5:48
  • $\begingroup$ Thanks also for the information dear sire but i find it hard to understand w/o Video cuz im still blender adept (17 days in blender) $\endgroup$ Commented Apr 18, 2022 at 8:02
  • $\begingroup$ Another suggestion would be to create a single loop cut across the middle of your object then, with the loop still selected, use CTRL-B to bevel it. Moving the mouse during the bevel operation moves the resulting edges symetrically. $\endgroup$
    – John Eason
    Commented Apr 18, 2022 at 8:30
  • $\begingroup$ Thanks i put that in mind $\endgroup$ Commented Apr 18, 2022 at 8:45
  • $\begingroup$ I'll add that as an answer to show what I mean. $\endgroup$
    – John Eason
    Commented Apr 18, 2022 at 9:09

2 Answers 2

2
$\begingroup$

As XY says, if the width is not the same, the solution is probably to mirror, you can do it with the Mesh > Symmetrize tool. If the axis is not good you can change it in the Operator box:

enter image description here

If you have a lot of symmetrize operations to do, it's better to give it a Mirror modifier.

$\endgroup$
2
  • $\begingroup$ imma try it on my blender Thank for the Help $\endgroup$ Commented Apr 18, 2022 at 7:50
  • $\begingroup$ HOLY SHIT thanks for the Tip sire now the edge on the left and right is symetrical a video also help me Thanks alot tbh the video the one that make me undestand lel $\endgroup$ Commented Apr 18, 2022 at 8:02
3
$\begingroup$

Create a single loop cut across the middle of your object then, with the loop still selected, use CTRL-B to bevel it. Moving the mouse during the bevel operation moves the resulting edges symetrically. Make sure you only have a single cut enabled during the bevel by scrolling the mouse wheel down.

enter image description here

$\endgroup$
1
  • $\begingroup$ see, this is what i mean from comment turn to video its much easier to understand and what the ** idk it was that easy with that way. $\endgroup$ Commented Apr 18, 2022 at 11:57

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .