Every time I simulate a fluid simulation in blender it always 'hovers' above the desired collision. I've tried applying the scale, I've also tried to set the normals to a smaller size but still no changes. I'm not sure what could be causing this.
$\begingroup$
$\endgroup$
2
-
$\begingroup$ if u provide blend file, i can help you $\endgroup$– ChrisJan 16, 2022 at 5:41
-
$\begingroup$ <img src="https://blend-exchange.com/embedImage.png?bid=gLk8r7mx" /> $\endgroup$– JaidenJan 16, 2022 at 7:24
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
2
This little box which you can see in your domain represents the "smallest unit" of your fluid. If it is too big, it cannot "see"/recognize your obstacle. So you could either increase your domain resolution and/or increase the thickness of your obstacle.
to make it work change this:
select your plane (obstacle), add a solidify modifier like this:
Note: It has to be before your fluid modifier.
Uncheck your "is planar"
bake again and you will get:
or...without the modifier:
uncheck "is planar" and change resolution to 120:
-
-
$\begingroup$ Please click on the checkmark left of my answer, if it helped you. Thank you! $\endgroup$– ChrisJan 16, 2022 at 9:15